Untuk mendapatkan informasi lebih lengkap tentang:

Shimpo Small Chucks Force Gauge Jig 6SC-3/8 (4SC-3/8)

Segera Hubungi Kami :

(62) 778 408 6403

(62) 815 3611 0114

sales@lfc.co.id

Shimpo small chucks Force Gauge Jig 6SC-3/8 (4SC-3/8) is devised for firmly holding a test specimen with up to 100 Newton, which are suitable for pulling, peel and stretch test of elastic paper, cloth, rubber, film, sticker. You can use this mini jig with digital or analog force gauge to run a precision testing of pull combination with either motorized-programmable force test or with manual pulling stand combination. Shimpo Small Chucks Force Gauge Jig 6SC-3/8 (4SC-3/8) is highly recommended for any Shimpo force gauge or any brands on your current workbench. Depend on your budget, you can also order this heavy duty clamp with either manual hand-crank lever or or Shimpo motorised digital stand as well.

 

Shimpo Small Chucks Force Gauge Jig 6SC-3/8 (4SC-3/8) features:

  • Suited for thin or small test pieces and for tests where low loads are applied to small lightweight objects.
  • Compatible gauge attachement with all Shimpo force gauge such as FGJN-1~50, FGP-1~50 and FGPX-1~50.
  • Suitable for tensile tests on various materials of products such as cosmetics and breaking tests on LCD panels, materials, etc.
  • For peeling tests of the aluminum foil on tablet packaging, seals, etc.

 

SPESIFIKASI Shimpo Small Chucks Force Gauge Jig 6SC-3/8 (4SC-3/8)

Shimpo Small Chucks Force Gauge Jig 6SC-3/8 (4SC-3/8) Ordering Guide:

 
型式 / model no. 4SC-3:(M4)
6SC-3:(M6)
 試験方向 / operating direction 引張り / Pulling
 許容荷重 / maximum load 100N
 口幅 3mm
 開き幅 0~2mm
 取付可能フォースゲージ 4SC-3: FG□-0.2,0.5
6SC-3: FG□-1~100
 質量 約25g
   
 型式 4SC-8:(M4)
6SC-8:(M6)
 試験方向 引張り
 許容荷重 150N
 口幅 8mm
 開き幅 0~3mm
 取付可能フォースゲージ 4SC-8: FG□-0.2,0.5
6SC-8: FG□-1~100
 質量 約26g


 
※取り付けるフォースゲージは治具の許容荷重をご確認の上選定して下さい。
※計測軸のねじ寸法がM4のフォースゲージについては、(M4)の型式でご注文下さい。
 その他の機種は(M6)です。
    
    M4:FG□-0.2~0.5
    M6:FG□-1~100

 

Harga Shimpo Small Chucks Force Gauge Jig 6SC-3/8 (4SC-3/8)

Silahkan isi formulir di bawah ini untuk mendapatkan harga terbaik dari tim kami.

Shimpo small chucks Force Gauge Jig 6SC-3/8 (4SC-3/8) is devised for firmly holding a test specimen with up to 100 Newton, which are suitable for pulling, peel and stretch test of elastic paper, cloth, rubber, film, sticker. You can use this mini jig with digital or analog force gauge to run a precision testing of pull combination with either motorized-programmable force test or with manual pulling stand combination. Shimpo Small Chucks Force Gauge Jig 6SC-3/8 (4SC-3/8) is highly recommended for any Shimpo force gauge or any brands on your current workbench. Depend on your budget, you can also order this heavy duty clamp with either manual hand-crank lever or or Shimpo motorised digital stand as well.

 

Shimpo Small Chucks Force Gauge Jig 6SC-3/8 (4SC-3/8) features:

 

">