Untuk mendapatkan informasi lebih lengkap tentang:

Shimpo Jacob’s Chuck Grips Force Gauge Jig GC-20

Segera Hubungi Kami :

(62) 778 408 6403

(62) 815 3611 0114

sales@lfc.co.id

Shimpo Jacob’s Chuck Grips Force Gauge Jig GC-20 is devised to firmly holding a test specimen with up to 500 Newton of force test. You can hold an object with radial symmetry, especially a cylinder which are slippery to grip with a flat clamp models. This jacob chuck is suitable for tensile and compression test on metal shaft, wire, cables, fiberous wires, fiber optic, ropes by turning its lock with a thumb key. This classic mechanism allows any digital or analog force gauge to run a precision testing of pull combination with either motorized-programmable force test or with manual pulling stand combination.

You can also clamp the lower end part of the specimen with regular locking vise while using this compact clamping attached to the force gauge connecting pin. Shimpo Jacob’s Chuck Grips Force Gauge Jig GC-20 is highly recommended for any Shimpo force gauge or any brands on your current workbench. Depend on your budget, you can also order this heavy duty clamp with either manual hand-crank lever stand or Shimpo motorised digital stand as well. 

 

Shimpo Jacob’s Chuck Grips Force Gauge Jig GC-20 features:

  • Tensile breaking tests for the materials of welded ribs.
  • Precisely measured for heavy-duty clamping jig on 500 Newton force test
  • Tensile breaking tests for pipes.
  • Round bar shaped test pieces can be held firmly with zero slip.
  • Compatible gauge attachement with Shimpo FGJN-1~50, FGP-1~50 and FGPX-1~50.
  • Suitable for clamping wires, cables, rubber, smaller shaft and many more.

 

SPESIFIKASI Shimpo Jacob’s Chuck Grips Force Gauge Jig GC-20

Shimpo Jacob’s Chuck Grips Force Gauge Jig GC-20 Ordering Guide:


 
型式 / Product number GC-20
 試験方向 / Operating direction 引張り / Pulling
 許容荷重 / Maximal load 500N
 開き幅 / Open width φ0.5~5mm

 取付可能フォースゲージ

Compatible With All Shimpo Force Gauge

FGJN-1~50
FGP-1~50
FGPX-1~50 
 質量 / Weight 上側:約160g
下側:約430g

 

Harga Shimpo Jacob’s Chuck Grips Force Gauge Jig GC-20

Silahkan isi formulir di bawah ini untuk mendapatkan harga terbaik dari tim kami.

Shimpo Jacob’s Chuck Grips Force Gauge Jig GC-20 is devised to firmly holding a test specimen with up to 500 Newton of force test. You can hold an object with radial symmetry, especially a cylinder which are slippery to grip with a flat clamp models. This jacob chuck is suitable for tensile and compression test on metal shaft, wire, cables, fiberous wires, fiber optic, ropes by turning its lock with a thumb key. This classic mechanism allows any digital or analog force gauge to run a precision testing of pull combination with either motorized-programmable force test or with manual pulling stand combination.

You can also clamp the lower end part of the specimen with regular locking vise while using this compact clamping attached to the force gauge connecting pin. Shimpo Jacob’s Chuck Grips Force Gauge Jig GC-20 is highly recommended for any Shimpo force gauge or any brands on your current workbench. Depend on your budget, you can also order this heavy duty clamp with either manual hand-crank lever stand or Shimpo motorised digital stand as well. 

 

Shimpo Jacob’s Chuck Grips Force Gauge Jig GC-20 features:

 

">