- Home
- Products
- Force & Torque
- Force Gauge
- Shimpo Vertical Force Gauge Motorized Test Stands FGS-50E
Untuk mendapatkan informasi lebih lengkap tentang:
Segera Hubungi Kami :
Shimpo Vertical Force Gauge Test Stands FGS-50E is devised for precision testing of pull and push gauging within a fully motorized stroke of 400mm on a various gauging application. You can also have a user selectable high and low force set points with loads up to 500 N which can be measured with any model of force gauge. The steel construction of its monocoque frame allows for constant linear motion and improvised attachment of force gauge to perform a precision reliability and versatility needed for a multitude of applications such as testing latching strength for velcro, stickers tore, adhesive quality of fabric hook, zippers, and loop fasteners.
Your investment on Shimpo Vertical Force Gauge Test Stands FGS-50H, will allow you to have two modes of operation. Two travel speed ranges are available to be selected from: low-speed type (6 - 108 mm/min) and high-speed type (20 - 600 mm/min). This practical stand is highly regarded for both tension and compression testing as the height can be adjusted to four operational modes: Manual, Jog, 1-Cycle, and Repeated Reciprocation. With a compact and sturdy design (20 kg). Applicable force measurement may includes quality of adhesives or tapes, packaging, tore and compressed leak of food container, sticker, door latch, quality of spring, wire testing, fibres, malleable strength of more complicated tests can also be performed like peeling, friction, texture. complimentary testing for shore test of consumer products and more.
Shimpo Vertical Force Gauge Test Stands FGS-50H Dimensional:
Shimpo Vertical Force Gauge Test Stands FGS-50E Ordering Guide:
シリーズ | FGS-50E | |
---|---|---|
型式 | FGS-50E-L(低速仕様) | FGS-50E-H(高速仕様) |
計測荷重 | 500N(50kg) | |
耐荷重 | 500N(50kg) | |
送り速度 | 6-180mm/min | 20-600mm/min |
速度設定 | 操作パネルにて、速度を設定 | |
ストローク | 400mm | |
表示部 | LCD 3桁、移動速度、動作モードを表示 | |
移動速度 | 6-180mm/min | 20-600mm/min |
動作モード | マニュアル(MAU)、寸動(JOG)、1サイクル(SIG)、往復繰り返し(CON) | |
入力 | オーバーロード入力 FGPX(FGP)のオーバーロード信号で停止 |
|
測定テーブル | 150×93mm | |
使用温度範囲 | 0-45℃(ただし、結露しないこと) | |
電源 | AC100V-AC240V±10% | |
質量 | 約20kg | |
外形寸法 | 220×680×358mm | |
付属品 | ・接続ケーブル 1本 ・電源ケーブル 1本 ・ケーブルクリップ 1個 ・ソケットボルト(M4×12 フォースゲージ取付け用 4個、M6×12 治具取付け用 2個) ・六角棒スパナM8用 1個、M4用 1個 ・取扱説明書 1冊 ・保証書 1枚 |
|
対応機種 (対応デジタルフォースゲージ) |
FGPシリーズ(0.2-50)、FGPX(0.2-50) |
Silahkan isi formulir di bawah ini untuk mendapatkan harga terbaik dari tim kami.