Untuk mendapatkan informasi lebih lengkap tentang:

Sisma Laser Marking BIG SMARKY 10W

Segera Hubungi Kami :

(62) 778 408 6403

(62) 815 3611 0114

sales@lfc.co.id

Sisma BIG SMARK 10W marking laser machine is devised as a versatile marking machine with slight engraving capabilities at higher volume. Sisma Laser Engraving BIG SMARK 10W is highly precision system for marking hard plastic and metal materials even of bigger dimensions. Thanks to its class IV laser source level, you can have a concentrated heat source with narrower and faster marking rates on a single marking of 180x180 mm on steel than comparable laser marking brands.

Sisma BIG SMARK 10W marking laser allows you to have a beautifully accurate marking far superior than a Co2 laser machine. This innovative laser machine works by utilizing Fiber Ytterbium laser beam which emit light with a wavelength of 1064µm (10x smaller diameter compared to Co2 marking laser). The high quality laser source with 410mm of Z axis, gives the marking parameter of 180x180 mm on its wide working chamber. You can also attach accessories such as locking jigs, parts alignment, plates micro-feeder or the rotating table for the production without operator.

Your investment on Sisma's innovative BIG SMARK will improve your competency in marking on workpiece with slight depth. You can freely design any type of logo, barcode marking, relief or any tagging picture on graphic editing software and do slight engraving easily from its practical computer software as convenient as using a regular paper printer. Through the master SLC software, you can input compatible image formats of Svg, Dxf, Hpgl, Bmp and Jpg. Then, from its user friendly menu, you can easily control system for engraving parameter, axis, camera for object centering and positioning engraving cycles as well. However, if you are looking for much deeper engraving and marking, you might also wants to consider Sisma Laser Engraving BIG SMARK 200F - 700F.

 

Sisma Marking Laser BIG SMARK 10W Features:

  • Optimized for stainless steel marking, hard plastic, jewellery, precious minerals and tougher metallic surface.
  • Cleaner working environment with fine finishing, no need for futher abrasives.
  • Much safer and practical compared to regular milling with mixed qualities which followed by hazardous chemical etching & engraving.
  • Using the market's highest class IV laser source technology which produce seamless marking surface.
  • PLC interface, data network (ethernet), digital I/O
  • Manually adjusted Z shaft distance for larger object.
  • Includes intuitive software compatible with small to medium scale application.
  • Enclosed system and sealed laser source for minimal maintenance.
  • Suitable for production line which requires high quality marking on medium volume application.
  • Non consumable application unlike Co2 laser marking machine.
  • Object stage can be attached with vise, XY table and micrometer stage.
  • Can also be supplied with cooling panel for much efficient operation

 

Sisma Marking Laser BIG SMARK 10W optional accessory:

  • High precision rotary axis, static clamping device.
  • Ragging system with winder, dynamic measuring device,
  • Fumes aspirator.

 

SPESIFIKASI Sisma Laser Marking BIG SMARKY 10W

Sisma Laser Engraving Series Ordering Guide:

 
TECHNICAL DATA BIG SMARKY 10W - 200F - 400F - 500F 
Output power 10W - 20W - 40W - 50W
Wave lenght 1064 nm
Focals F100, F160 (std), F254 mm
Power supply 230V 50/60Hz 1ph
Cooling system Air
Working area 595x495x380 h mm
Dimensions 640x787x800h mm
Weight  144 Kg
Temperature (°C) from Tmin to Tmax 20 25 30 35
Max. relative humidity 85% 65% 50% 40%
 

Notes:

Constant ray of laser may result in higher temperature and affect the performance. Better circulation of cold air and fumes respirator are advised with pulsed mode operation for a much efficient approach. When you are using the machine with longer working time, make sure to install additional cooling panel to avoid unnecessary down time.

If you are looking for much affordable alternative for seamless marking laser on smaller range, you might also wants to consider Sisma Marking Laser LOGO Series, or if you would like a mould repair laser welding unit, you can opt for Sisma SWA mold repair specialist.

Harga Sisma Laser Marking BIG SMARKY 10W

Silahkan isi formulir di bawah ini untuk mendapatkan harga terbaik dari tim kami.

Sisma BIG SMARK 10W marking laser machine is devised as a versatile marking machine with slight engraving capabilities at higher volume. Sisma Laser Engraving BIG SMARK 10W is highly precision system for marking hard plastic and metal materials even of bigger dimensions. Thanks to its class IV laser source level, you can have a concentrated heat source with narrower and faster marking rates on a single marking of 180x180 mm on steel than comparable laser marking brands.

Sisma BIG SMARK 10W marking laser allows you to have a beautifully accurate marking far superior than a Co2 laser machine. This innovative laser machine works by utilizing Fiber Ytterbium laser beam which emit light with a wavelength of 1064µm (10x smaller diameter compared to Co2 marking laser). The high quality laser source with 410mm of Z axis, gives the marking parameter of 180x180 mm on its wide working chamber. You can also attach accessories such as locking jigs, parts alignment, plates micro-feeder or the rotating table for the production without operator.

Your investment on Sisma's innovative BIG SMARK will improve your competency in marking on workpiece with slight depth. You can freely design any type of logo, barcode marking, relief or any tagging picture on graphic editing software and do slight engraving easily from its practical computer software as convenient as using a regular paper printer. Through the master SLC software, you can input compatible image formats of Svg, Dxf, Hpgl, Bmp and Jpg. Then, from its user friendly menu, you can easily control system for engraving parameter, axis, camera for object centering and positioning engraving cycles as well. However, if you are looking for much deeper engraving and marking, you might also wants to consider Sisma Laser Engraving BIG SMARK 200F - 700F.

 

Sisma Marking Laser BIG SMARK 10W Features:

 

Sisma Marking Laser BIG SMARK 10W optional accessory:

 

">