Untuk mendapatkan informasi lebih lengkap tentang:
Pao Fong NC Milling Machine PF-6SH-PLC
Segera Hubungi Kami :
(62) 778 408 6403
(62) 815 3611 0114
sales@lfc.co.id
Pao Fong NC Milling Machine PF-6SH-PLC is devised as a programmabe semi-auto machining center machine with adjustable function as center-vertical drilling, milling and mini-lathe turning application. The Milling cutters tool are held in the arbor and rotate on its axis with the versatility of extended (or the table can be raised/lowered) and allows plunge cuts and drilling of various workpiece held in a machine vice. The four in one machine combines practical automatic control via PLC with its fourth axis, within 1,8 tons of weight. Powered by a spartan 5 HP electric motor, you can work on various range of workpiece with easy maintenance. You can also easily install additional accesories such as coolant sprayer, magnetic base indicators, magnifiers, UV lamp or digital readout (DRO) for easy alignement of its table to suit your application.
Thanks to its monocoque frames of high quality casted iron, the vibrations on this Inverter Speed Head Knee Mill can be absorbed and minimized your operators' fatigue. As the cutters have good support from the arbor and have a larger cross-sectional area than an end mill, you can work lock the workpiece on its turning jaw and cut on any section desired within its 254 x 1372 mm table standard to accomplish precision cutting.
Your investment on Pao Fong Horizontal Milling Machine PF-6H will improve your machining versatility in terms of its faster set up in daily routines. Furthermore, the automatic lubrication sideways and feed screws will ensures accurate motion for all parts within lubrication interval of 60 minutes. This is suitable for any level of fabrication who consider long terms value within an affordable budget. However, if you are looking for higher power of 5 HP motor, you might also wants to consider Pao Fong Vertical Milling Machine PF-5S.
Pao Fong Vertical Milling Machine PF-2S Features:
- Spindle Motor Stop brake Auto Power off
- 5 HP Spindle Motor
- Touch Simple Automatic Control
- 254 x 1372 mm table standard
- 305 x 1372 mm table optional
- Spindle Taper NST# 40
- Special Square Head for Step Speed
- X-axis Dovetail slide way
- Y, Z-axes Square Way
- X, Y-axes Coated with Turcite-B
- X, Y, Z-axes Hardened & Ground
- Automatic Lubrication sideways and feed screws ensures, Accurate motion for all parts Lubrication interval is 60 minutes optional
Optional Equipment:
- Coolant System
- Chip (pan ) Guard
- Adjustable Safety Table Cover
- Work Lamp
- Milling Chuck with Collets
- Clamping Kits & Machine Vise
- Percision Ball Screw for X, Y-axes
- Digital Readout for X, Y, Z-axes
- Electric Cabinet with 6 Drop Control Panel + spindle Motor Auto Brake
- Y-axes Power Feed
Delivered With Standard Accessories:
- Horizontal Mill Arbor 27mm 1/pcs
- Horizontal Draw Bar 1/pcs
- Vertical Draw 1/pcs
- Tools & Tool Box, Operation Manual
- One Shot Lubrication
- Front & Rear Plastic Splash Guard
SPESIFIKASI Pao Fong NC Milling Machine PF-6SH-PLC
Pao Fong NC Milling Machine PF-6SH-PLC Ordering Guide:
| Tables | |
| Working surface | 1372 x 254mm |
| X-axis travel | 840/930mm |
| Y-axis travel | 420mm |
| Z-axis travel (knee) | 470mm |
| T-slots | (3) 16 x 3 x 63mm |
| Head | |
| Quill travel | 125mm |
| Quill diameter | 105mm |
| Spindle taper | NST40 |
| Quill feeds | 0.04/0.08/0.15mm |
| Step spindle speeds | 50Hz:4P/8P 70~4700rpm |
| Variable spindle speeds | 50Hz:4P/8P 55~2720rpm |
| Spindle nose to table top | 80~600mm |
| Motors 5 HP | |
| Vertical spindle motor | 3.75Kw (5HP)(Opt. 7.5HP) |
| Knee | 0.75Kw (1HP) |
| Lubrication pump | 3W |
| Coolant pump | .01Kw (1/8HP) |
| Dimensions | |
| Dimensions (L x W X H) | 2380 x 2000 x 1680mm |
| Weight | 1750kgs |
| Standard equipment: | Draw bar Work lamp Chip guard (pan) Tools & toolbox Auto lubrication X,Y,Z Rapid traverse Y-axis metal way cover Rear rubber dust guard X,Y,Z Ball screws Coolant system |
| Optional accessories: | Spindle micrometric feed Air draw bar |
Pao Fong Vertical Milling Machine With Other Higher Models Ordering Guide:
|
Model |
PF – 5S |
PF – 5VS |
PF–6S |
PF – 6VS |
|
|
Working Surface |
254 x 1372 mm |
254 x 1372 mm |
|||
|
Longitudinal Travel (X-axis) |
930 mm |
900 mm |
|||
|
Cross Travel (Y-axis) |
420 mm |
400 mm |
|||
|
Knee Tavel (Z-axis) |
470 mm |
460 mm |
|||
|
T – slot (3) |
15.9 mm |
||||
|
Quill Travel |
125 mm |
||||
|
Quill Diameter |
105 mm |
||||
|
Spindle Tapper |
N.S.T # 40 |
||||
|
Qill Feeds |
0.04/0.08/0.15 mm (0.0015” – 0.003” – 0.006) |
||||
|
Spindle Motor |
5 HP |
||||
|
Step Spindle Speeds |
50 Hz: 4P/8P-35 ~ 2850 r.p.m. 2P/4P-70 ~ 4700 r.p.m. (O.P.T) 60Hz: 4P/8P-45 ~ 3000 r.p.m. 2P/4P-90 ~ 3600 r.p.m. (O.P.T) |
||||
|
Veriable Spindle Speeds |
50 Hz: 4P/8P-55 ~ 2720 r.p.m. 3900 r.p.m. (O.T.P) 60 Hz: 4P/8P-70 ~ 3400 r.p.m. |
||||
|
Overal Height H |
2380 mm |
2540 mm |
|||
|
Overal Depth L |
2000 mm |
1970 mm |
|||
|
Overal Width W |
2180 mm |
2180 mm |
|||
|
Ram Travel |
584 mm |
584 mm |
|||
|
Overarm Swivel On Turret |
360o |
||||
|
Head Tilt Front – to – back |
40 o – 0 o – 45 o |
||||
|
Head Tilt Left – to – right |
90 o – 0 o – 90 o |
||||
|
Approx. Net Weight |
1588 / 1668 kgs |
1637 / 1716 kgs |
|||
|
Packing Dimensions |
171 x 155 x 200 cm |
179 x 153 x 217 cm |
|||
Harga Pao Fong NC Milling Machine PF-6SH-PLC
Silahkan isi formulir di bawah ini untuk mendapatkan harga terbaik dari tim kami.
