Untuk mendapatkan informasi lebih lengkap tentang:

Pao Fong Horizontal Milling Machine PF-6H

Segera Hubungi Kami :

(62) 778 408 6403

(62) 815 3611 0114

sales@lfc.co.id

Pao Fong Milling Machine PF-6H is devised as a horizontally oriented line of semi-auto milling machine with minimal friction on its spindle and arbor. The Milling cutters tool are held in the arbor and rotate on its axis with the versatility of extended (or the table can be raised/lowered) and allows plunge cuts and drilling of various workpiece held in a machine vice. The classic machine combines compact form factor within 1,8 tons of weight and spartan 5 HP electric motor which is highly considered by many fabricator to work on various range of workpiece (other brands on the same class offer 4HP motors with similar spec). You can also easily install additional accesories such as coolant sprayer, magnetic base indicators, magnifiers, UV lamp or digital readout (DRO) for easy alignement of its table to suit your application. 

Thanks to its monocoque frames of high quality casted iron, the vibrations on this Inverter Speed Head Knee Mill can be absorbed and minimized your operators' fatigue. As the cutters have good support from the arbor and have a larger cross-sectional area than an end mill, you can work on heavy cuts for rapid material removal rates as in mill grooves and slots, or simply trims the flat surfaces. Furthermore, several cutters can also be ganged together on the arbor to mill to achieve a complex shape of slots and planes. Special cutters can also cut grooves, bevels, radii, or indeed any section desired within its 254 x 1372mm table which can be easily fine tuned with its motorised spindle on both perpendicular and parallel to the spindle axis to accomplish precision cutting.

Your investment on Pao Fong Horizontal Milling Machine PF-6H will improve your machining capabilities in terms of its faster machining set up in daily routines. The cutter can be changed easily by loosening nuts and bolts that hold the arbor firmly in position. Then you can slid off the arbor shaft over arm. The cutters along with its spacers can be removed and the new one can be placed vice versa while the arbor bracket tightened back in position. Furthermore, Automatic Lubrication sideways and feed screws will ensures accurate motion for all parts within lubrication interval of 60 minutes. This is suitable for any level of fabrication who consider long terms value within an affordable budget. However, if you are looking for higher power of 5 HP motor, you might also wants to consider Pao Fong Vertical Milling Machine PF-5S.

 

Pao Fong Vertical Milling Machine PF-2S Features:

  • 5 HP Spindle Motor
  • 254 x 1372 mm table standard
  • 305 x 1372 mm table optional
  • Spindle Taper NST# 40
  • X-axis Dovetail slide way
  • Y, Z-axes Square Way
  • X, Y-axes Coated with Turcite-B to ensure its linear-bearing can slide with low-friction strip C without uneccessary heat exchange and chatter.
  • X, Y, Z-axes Hardened & Ground
  • Automatic Lubrication sideways and feed screws ensures, Accurate motion for all parts Lubrication interval is 60 minutes optional

 

Optional Equipment:

  • Coolant System
  • Chip (pan ) Guard
  • Adjustable Safety Table Cover
  • Work Lamp
  • Milling Chuck with Collets
  • Clamping Kits
  • Machine Vise
  • Percision Ball Screw for X, Y-axes
  • Digital Readout for X, Y, Z-axes
  • Electrical Cabinet
  • Electric Cabinet with 6 Drop Control Panel + spindle Motor Auto Brake
  • Y-axes Power Feed

 

Delivered With Standard Accessories:

  • Horizontal Mill Arbor 27mm 1/pcs
  • Horizontal Draw Bar 1/pcs
  • Tools & Tool Box
  • One Shot Lubrication
  • Front & Rear Plastic Splash Guard

 

SPESIFIKASI Pao Fong Horizontal Milling Machine PF-6H

Pao Fong Horizontal Milling Machine PF-6H Ordering Guide:

 
Tables
Working surface 1372 x 254mm
X-axis travel 840/930mm
Y-axis travel 420mm
Z-axis travel (knee) 470mm
T-slots (3) 16 x 3 x 63mm
Head 
Quill travel 125mm
Quill diameter 105mm
Spindle taper NST40
Quill feeds 0.04/0.08/0.15mm
Step spindle speeds 50Hz:4P/8P 70~4700rpm
Variable spindle speeds 50Hz:4P/8P 55~2720rpm
Spindle nose to table top 80~600mm
Motors 5 HP
Vertical spindle motor 3.75Kw (5HP)(Opt. 7.5HP)
Knee 0.75Kw (1HP)
Lubrication pump 3W
Coolant pump .01Kw (1/8HP)
Dimensions  
Dimensions (L x W X H) 2380 x 2000 x 1680mm
Weight 1750kgs
Standard equipment: Draw bar
Work lamp
Chip guard (pan)
Tools & toolbox
Auto lubrication
X,Y,Z Rapid traverse
Y-axis metal way cover
Rear rubber dust guard
X,Y,Z Ball screws
Coolant system
Optional accessories: Spindle micrometric feed
Air draw bar

 

Pao Fong Vertical Milling Machine With Other Higher Models Ordering Guide:

 

Model

PF – 5S

PF – 5VS

PF–6S

PF – 6VS

Working Surface

254 x 1372 mm

254 x 1372 mm

Longitudinal Travel (X-axis)

930 mm

900 mm

Cross Travel (Y-axis)

420 mm

400 mm

Knee Tavel (Z-axis)

470 mm

460 mm

T – slot (3)

15.9 mm

Quill Travel

125 mm

Quill Diameter

105 mm

Spindle Tapper

N.S.T # 40

Qill Feeds

0.04/0.08/0.15 mm (0.0015” – 0.003” – 0.006)

Spindle Motor

5 HP

Step Spindle Speeds

50 Hz: 4P/8P-35 ~ 2850 r.p.m.

 2P/4P-70 ~ 4700 r.p.m. (O.P.T)

    60Hz: 4P/8P-45 ~ 3000 r.p.m.

 2P/4P-90 ~ 3600 r.p.m. (O.P.T)

Veriable Spindle Speeds

50 Hz: 4P/8P-55 ~ 2720 r.p.m.

 3900 r.p.m. (O.T.P)

60 Hz: 4P/8P-70 ~ 3400 r.p.m.

Overal Height                      H

2380 mm

2540 mm

Overal Depth                       L

2000 mm

1970 mm

Overal Width                       W

2180 mm

2180 mm

Ram Travel

584 mm

584 mm

Overarm Swivel On Turret

360o

Head Tilt Front – to  – back

40 o – 0 o – 45 o

Head Tilt Left – to – right

90 o – 0 o – 90 o

Approx. Net Weight

1588 / 1668 kgs

1637 / 1716 kgs

Packing Dimensions

171 x 155 x 200 cm

179 x 153 x 217 cm

 

Harga Pao Fong Horizontal Milling Machine PF-6H

Silahkan isi formulir di bawah ini untuk mendapatkan harga terbaik dari tim kami.

Pao Fong Milling Machine PF-6H is devised as a horizontally oriented line of semi-auto milling machine with minimal friction on its spindle and arbor. The Milling cutters tool are held in the arbor and rotate on its axis with the versatility of extended (or the table can be raised/lowered) and allows plunge cuts and drilling of various workpiece held in a machine vice. The classic machine combines compact form factor within 1,8 tons of weight and spartan 5 HP electric motor which is highly considered by many fabricator to work on various range of workpiece (other brands on the same class offer 4HP motors with similar spec). You can also easily install additional accesories such as coolant sprayer, magnetic base indicators, magnifiers, UV lamp or digital readout (DRO) for easy alignement of its table to suit your application. 

Thanks to its monocoque frames of high quality casted iron, the vibrations on this Inverter Speed Head Knee Mill can be absorbed and minimized your operators' fatigue. As the cutters have good support from the arbor and have a larger cross-sectional area than an end mill, you can work on heavy cuts for rapid material removal rates as in mill grooves and slots, or simply trims the flat surfaces. Furthermore, several cutters can also be ganged together on the arbor to mill to achieve a complex shape of slots and planes. Special cutters can also cut grooves, bevels, radii, or indeed any section desired within its 254 x 1372mm table which can be easily fine tuned with its motorised spindle on both perpendicular and parallel to the spindle axis to accomplish precision cutting.

Your investment on Pao Fong Horizontal Milling Machine PF-6H will improve your machining capabilities in terms of its faster machining set up in daily routines. The cutter can be changed easily by loosening nuts and bolts that hold the arbor firmly in position. Then you can slid off the arbor shaft over arm. The cutters along with its spacers can be removed and the new one can be placed vice versa while the arbor bracket tightened back in position. Furthermore, Automatic Lubrication sideways and feed screws will ensures accurate motion for all parts within lubrication interval of 60 minutes. This is suitable for any level of fabrication who consider long terms value within an affordable budget. However, if you are looking for higher power of 5 HP motor, you might also wants to consider Pao Fong Vertical Milling Machine PF-5S.

 

Pao Fong Vertical Milling Machine PF-2S Features:

 

Optional Equipment:

 

Delivered With Standard Accessories:

 

">