Untuk mendapatkan informasi lebih lengkap tentang:

Shimpo Tachometer Panel DT-5TS/DT-5TL Series

Segera Hubungi Kami :

(62) 778 408 6403

sales@lfc.co.id

SPESIFIKASI Shimpo Tachometer Panel DT-5TS/DT-5TL Series

Shimpo Tachometer Panel DT-5TS/DT-5TL Series Ordering Guide:

 
動作モード Operating Mode

回転速度計モード/流量計モード

Tachometer / Flow meter mode

通過時間計モード

Process Time Measurement Mode

時間幅モード

Elapsed Time Measurement/Monitoring Mode

表示その1

Main display

0~999999
6桁

6 digits

0:00:00~9:59:59
(時分秒 60進表示)

Minute and seconds to 60 indicator

0:00:00~0:59:59
(時分秒 60進表示)

Minute and seconds to 60 indicator

その2

Second display

0:00~999:99
(秒:1/100秒 10進表示)

Second is representated in 1/100 decimal

 
  ゼロサプレス付  With zero suppression

小数点位置

Decimal point position

10-1~10-5  

表示部

Display

メイン表示部:赤色7セグメントLED 文字高15㎜ 6桁 
サブ表示(2個):緑色7セグメントLED 文字高6.5㎜ 6桁+6桁 -表示可

Main display: red 7-segment LED Character height 15mm 6-digit
Sub-display (two): Green 7-segment LED character height 6.5㎜ 6-digit +6 digits - Display Allowed

入力範囲 / Input range

0.0067Hz~100kHz 10ms~3600s

計測精度

Measurement accuracy

±0.008%±1digit ±0.1%±1digit
フィルタ / Filter

100kHz、30kHz、10kHz、0.02kHzをパラメータで切替。
ただし、マグネチックセンサは10kHz、0.02kHzのみ、接点は0.02kHzのみ。

Switching 100kHz, 30kHz, 10kHz, the 0.02kHz in the parameter.
However, the magnetic sensor is 10kHz, 0.02kHz only, contacts 0.02kHz only.

表示周期 / display cycle 0.2、0.5、1、2、5、10、15、30、60秒
(パラメータ設定で変更可能) Can be changed depends on parameter setting

入力信号に依存

Depending on the input signal from sensor

プリスケール機能

Prescale function

前面パネルキーによるパラメータ設定方式。
表示値のティーチング(合わせ込み)も可能。

Parameter setting method by the front panel key.
Manual alteration of display value (narrowing suit) is also possible.

メモリ機能

Memory function

計測値の最大・最小値を記憶、サブ表示部に緑色LEDで表示する。

Storing the maximum and minimum values of the measured value, displayed in green LED on the sub-display unit.

上下限値

Upper & lower limit value

上下限値をサブ表示部に緑色LEDで表示可能。

Can be displayed by the green LED on the lower limit value to the sub-display.

オートゼロ機能

Autozero function

0.1~150秒

0.1 to 150 seconds

0.1~3600秒

0.1 to 3600 seconds

 

予測演算

Prediction calculation

パルス停止後の経過時間に従って、表示値を更新。

Update the display value in accordance with the elapsed time after the pulse stops.

絶縁抵抗

Insulation resistance

10MΩ以上(DC500Vメガにて) /  10MΩ or more (at DC500V mega)

耐電圧

Tolerable voltage

AC1500V以上 1min / AC1500V for more than 1min

耐ノイズ

Anti noise

電源端子ノーマル/コモンモード ±1500V / Power supply terminals normal / common mode ± 1500V

耐振動

Vibration resistance

JIS C-0911に準拠 振動周波数10~55Hz、片振幅0.5㎜、XYZ方向各10分間

Conform with JIS C-0911 compliances with the vibration frequency 10 ~ 55Hz,

half amplitude 0.5mm, XYZ direction for 10 minutes each

使用周囲温度

Ambient temperature

0℃~45℃(ただし結露のないこと)

0 ° C ~ 45 ° C (no condensation)

使用周囲湿度

Using ambient humidity

35~85%RH(ただし結露のないこと)

35 ~ 85% RH (no condensation)

使用周囲雰囲気

The ambient atmosphere use

腐食性ガスのないこと

No corrosive gas on working area

保護機能

Protective function

前面パネルIP66(相当)、後部端子台IP20

Front panel IP66 (or equivalent), rear terminal block IP20

ケース材質

Enclosure material

ABS樹脂 / ABS Plastic resin

外形寸法

External dimensions

W96×H48×D92㎜(DIN)
質量 / Weight 300g
 
Operational Modes RPM or Rate Measurement; Elapsed Time Measurement/Monitoring; Process Time Measurement; Flow Rate Measurement
Input Signals Contact input; Open collector input; Voltage pulse input (square wave); Voltage pulse input (sine wave)
Power Source AC85-264V
Functions Prescaling function; Calibration function; Auto-zero function; Sub-indicators; Moving-average indication; Sensor supply voltage 12V

 

Shimpo Tachometer Panel DT-5TS/DT-5TL Series Accesories Ordering Guide:

 
Proximity Sensors BI2-S12 NPN (NO) sinking output 1.5 kHz frequency, LED indication, 6.5’ (2 m) cable, 0.08” (2 mm) sensing distance, NEMA 6 (IP67) rating
MCS-3109 NPN (NO,NC) output, 300 Hz frequency, 0.32” (8 mm) sensing distance, 6.5’ (2 m) cable, NEMA 6 (IP67) rating, for use in high vibration areas
Retro-Reflective Photo Sensors MCS-625 Photo sensor with NPN sinking output, 250 Hz activating frequency, 10’ (3 m) cable 1” to 3’ (25 to 914 mm) operating range
MCS-655 Photo sensor with NPN sinking output, 333 Hz activating frequency, LED status, 10’ (3 m) cable, NEMA 4 (IP65), 1” to 3’ (25 to 914 mm) operating range for light or dark activation.
LS-S50MLR Laser sensor with NPN/PNP (NO,NC) outputs, 1.5 kHz frequency, LED indication, 6’ (1.8 m) with quick disconnect connection, NEMA 6 (IP67) rating

 

Dapatkan Penawaran Harga

Silahkan isi formulir di bawah ini untuk mendapatkan penawaran harga terbaik dari tim kami,

Shimpo Tachometer Panel DT-5TS/DT-5TL Series are devised as a compact digital panel to cater the needs for durable indicator unit with water-proof and humid-proof front panel for food, cannery, pharmaceuticals and improvised automation system.  This versatile panel is provided with various functions including calibration, memory, and prescaling. When connecting the Shimpo Tachometer Panel DT-5TS/DT-5TL Series with a compatible in-line sensor and input signals from various devices such as rotary encoders, magnetic sensors, and line drivers, you can have an improvised arrangement to adapt with wide range of measuring environments (Analog output and line receiver input are optional). It accepts input signals from various devices such as rotary encoders, magnetic sensors, and line drivers (basic input: DT-5TS, differential input: DT-5TL).

Your investment on Shimpo Tachometer Panel DT-5TS/DT-5TL Series will allow you to have a reliable display indicator/controller while reflecting a prestige outlook on your automation system. The practical Shimpo Tachometer Panel DT-5TS/DT-5TL Series provides power output to the sensors, eliminating the need for a separate power supply. is highly regarded in the production line of beverages and sauce bottling, palm oil packaging, and cosmetics company.

 

Shimpo Tachometer Panel DT-5TS/DT-5TL Features:

 

">