Untuk mendapatkan informasi lebih lengkap tentang:

Shimpo Horizontal Force Gauge Test Stands FGS-50XB-L/H

Segera Hubungi Kami :

(62) 778 408 6403

(62) 815 3611 0114

sales@lfc.co.id

Shimpo Horizontal Force Gauge Test Stands FGS-50XB-L/H is devised for precision testing of pull and push gauging with motorized-programmable force test stand combination. With Shimpo's line of top quality force gauges, you can have a complete force measurement system capable of handling the most precise testing applications with minimal influence of gravitational force. The steel construction of its monocoque frame and servo motor performing a precision whilst its programming capabilities provide the versatility to tackle a multitude of applications. Various movement modes are available for the force gauge, e.g. jogging and repeated reciprocation, according to the purpose and intended use.

Your investment on Shimpo Horizontal Force Gauge Test Stands FGS-50XB-L/H, will allow you to have two modes of operation, single or continuous cycling allow for a single precise test or repetitive, consistent results. You can also have a user selectable high and low force set points through RS232 interface or directly through the force gauge allows the test stand to stop at specific force loads while displaying and outputting the displacement. The FGS-100PXH/L motorized test stand offers a wide range of force capacities in horizontal configurations and are available in both standard and ultra-slow speeds. Applicable force measurement may include quality of weld force between electrodes, fabrics, door latch, quality of spring, wire testing, fibres, malleable strength of more complicated tests can also be performed like peeling, friction, texture. complimentary testing for shore test of consumer products and many more.

 

Shimpo Horizontal Force Gauge Test Stands FGS-50XB-L/H Features:

  • 5 user programmable set points for speed, distance and stop time permit customized testing
  • Compatibility with nearly all manufacturers’ force gauges enables flexibility in testing applications
  • Analog voltage output of displacement allows graphing and analysis of data on computer
  • Manually adjustable upper and lower limits restricts movement, allowing for precise testing
  • All gauge functions can be communicated through stand via RS232 interface allowing easy operation and data download
  • Compact, modular design reduces weight, footprint and cost of stand
  • Equipped with an emergency stop switch and can also be controlled with a comparator output signal (when an FGX Series force gauge is mounted).

 

SPESIFIKASI Shimpo Horizontal Force Gauge Test Stands FGS-50XB-L/H

Shimpo Horizontal Force Gauge Test Stands FGS-50XB-L/H Dimensional:

Shimpo Horizontal Force Gauge Test Stands FGS-50XB-L/H Ordering Guide:

 
Models

FGS-100PXH

Horizontal Motorized Test Stand with standard speed and 110 lb (50 kg) capacity

FGS-100PXL

Horizontal Motorized Test Stand with low speed and 110 lb (50 kg) capacity

Operation Orientation Horizontal
Capacity 110 lb (50 kg)
Travel Speed 0.79 – 19.69 inch/min
(20 – 500 mm/min)
0.19 – 4.72 inch/min
(5.00 – 120 mm/min)
Stroke 5.5” (140 mm)
Vertical Clearance N/A
Display Four digit LED, 0.41” high (10.5 mm), Reads in inches (0.01 resolution) or millimeters (0.1 resolution)
Operating Mode Manual (MANU)
Jogging (JOG)
Single (SING)
Continuous (CONT)
Program (PROG)
Analog Voltage Outputs the displacement of the stand 10mV/mm MAX: ±1.4V
Communications RS-232C
Time Delay 0 through 5 second delay between direction change
Power 120 VAC, 60 Hz
Product Weight 40 lb (18 kg)

Notes: Digital force gauge is sold separately

 

Shimpo Horizontal Force Gauge Accessories Ordering Guide:

 
UNI-PLATE Gauge mounting plate for FGS-100 Series Stands
FGV-FGS250P Interface cable for FGS-100 & FGS-250 force test stands
FGS-ANALOG Analog output cable for force test stands
FG-250PV-RS232 RS-232 Communication cable from FGS stand to computer
FG-HORIZ-ADAP Grip adapter for horizontal test stands

 

Harga Shimpo Horizontal Force Gauge Test Stands FGS-50XB-L/H

Silahkan isi formulir di bawah ini untuk mendapatkan harga terbaik dari tim kami.

Shimpo Horizontal Force Gauge Test Stands FGS-50XB-L/H is devised for precision testing of pull and push gauging with motorized-programmable force test stand combination. With Shimpo's line of top quality force gauges, you can have a complete force measurement system capable of handling the most precise testing applications with minimal influence of gravitational force. The steel construction of its monocoque frame and servo motor performing a precision whilst its programming capabilities provide the versatility to tackle a multitude of applications. Various movement modes are available for the force gauge, e.g. jogging and repeated reciprocation, according to the purpose and intended use.

Your investment on Shimpo Horizontal Force Gauge Test Stands FGS-50XB-L/H, will allow you to have two modes of operation, single or continuous cycling allow for a single precise test or repetitive, consistent results. You can also have a user selectable high and low force set points through RS232 interface or directly through the force gauge allows the test stand to stop at specific force loads while displaying and outputting the displacement. The FGS-100PXH/L motorized test stand offers a wide range of force capacities in horizontal configurations and are available in both standard and ultra-slow speeds. Applicable force measurement may include quality of weld force between electrodes, fabrics, door latch, quality of spring, wire testing, fibres, malleable strength of more complicated tests can also be performed like peeling, friction, texture. complimentary testing for shore test of consumer products and many more.

 

Shimpo Horizontal Force Gauge Test Stands FGS-50XB-L/H Features:

 

">