- Home
- Products
- Hand Tools
- Tachometer
- Shimpo Data-Logging Tachometer DT-2100
Untuk mendapatkan informasi lebih lengkap tentang:
Segera Hubungi Kami :
The latest Shimpo DT-2100 Data-Logging Tachometer is the top tier tachometer by NIDEC-SHIMPO. The Shimpo DT-2100 is devised as the ultimate tachometer for engineers and calibration professionals. Powered by its on-board data-logging, graphing and statistical analysis, Shimpo DT-2100 simplify the complex testing on site for thorough diagnosis on the most difficult machinery measurements. Data can be transmitted to the optional software to further analyze and diagnose system performance.
The Shimpo DT-2100 also accomodate the results to be viewed on selectable display styles includes: standard numerical, chart, bar graph or gauge modes. Max., Min. and Ave. Shimpo DT-2100 can be quickly scrolled through for additional test feedback. Data recording can be set for single point or continuous logging. Unlike regular tachometer where two people are required to perform a test, a single user can just mount the Shimpo DT-2100 conveniently on its tri-pod connection then select continuous logging and adjust machinery as necessary. The Shimpo DT-2100 also allows multiple users to store their programmed settings. The Shimpo DT-2100 Tachometer is 2 units in 1 with the included 6” circumference contact adapter utilized in linear rate measurement. The Shimpo DT-2100 also allows convenient switching between non-contact and contact operation with its auto-detect function that instantly detect connected probe adapter. If the larger 12” circumference wheel is desired for detecting finer resolution at higher speeds, simply select the menu of appropriate wheel and the Shimpo DT-2100 will instantly calculate the speeds of 6-99,999 rpm on non-contact setting and 0.8-25,000 rpm for contact probes.
The Shimpo DT-2100 possesses the ability to calculate lengths in non-contact laser operation. This feature adds a level of convenience and capability as often it is dangerous or not possible to take a reading by physical contact. Another very beneficial feature that will alleviate user adjusted calculations after the test is the Shimpo DT-2100’s scaling function. Shimpo DT-2100 enables user for a manual override of the data parameter for your specific application. Then, applicable scaling function in measuring product length can be set to measure amount of distance for its non-product gap that should be eliminated from the total. The scaling feature factors this gap out to provide the accurate total length at the end of the test. The user can factor this gap out and come up with the accurate length at the end. Proffesional PC software for the Shimpo DT-2100 is available separately. This software provides the ability to program the tachometer to any desired parameter and refined analysis of the data as well.
Shimpo Shimpo DT-2100 Data-Logging Tachometer Features:
Shimpo DT-2100 Data-Logging Tachometer
Model | DT-2100 |
Range | 6-99,999 rpm Non-contact 0.8-25,000 rpm Contact |
Accuracy | ±0.006% of reading ±1 least significant digit |
Measuring Units | Speed: rpm, m/min., cm/min., inch/min., ft/min., yds/min., rps, m/sec, cm/sec, inch/sec, km/hr, mph Distance: cm, m, km, in, ft, yd |
Memory | Continuous Mode: 1000, Single Mode: 100, Statistics Mode: 100 |
Measuring Distance | 2” to 13.1’ (50 to 4,000 mm) |
Display | Graphical Blue Light OLED, reversible |
Display Update Time | 100 ms, 500 ms, 1 sec, 5 sec |
Power Requirement | 2 AA 1.5V batteries or USB |
Battery Life | Approx: 20 hours with brightness set to 20% |
Temperature Limits | 32º – 113ºF (0º – 45ºC) Non-Condensing |
Construction | Polycarbonate |
Dimensions | 6.1” x 2.2” x 1.4” (155 x 55 x 35 mm) |
Product Weight | 5.6 oz (159 g) |
Package Weight | 1.25 lb (567 g) |
Approvals | CE, RoHs |
Included Accessories | 2 cone adapters, funnel adapter, 3½” extension shaft, carrying case, master wheel (6” cir.), 2 AA batteries, contact adapter |
Shimpo DT-2100 Data-Logging Tachometer Separate Order Guide:
T-2100 | Data-Logging, Contact, Non-Contact Laser Tachometer with USB Output, 6” cir. wheel |
DT-2100-OP-PCS | PC Software for DT-2100 Tachometer with USB Cable |
NIST-TACH | NIST traceable certificate with data |
Shimpo DT-2100 Data-Logging Tachometer Probes Order Guide:
DT-2100-OP-CAS | Replacement Contact Adapter for DT-2100 Tachometer |
CONE | 1/2 inch cone adapter |
CONE-3/4 | 3/4 inch cone adapter |
CONE-1-1/4 | 1-1/4 inch cone adapter |
EXT-SHAFT | 3.5 inch extension shaft for handheld tachometers |
FPM-12 | 12 inch circumference measuring wheel |
FPM-6 | 6 inch circumference measuring wheel |
FPM-6-GV | 6 inch circumference grooved measuring wheel |
FUNNEL | 1/2 inch funnel adapter |
FUNNEL-3/4 | 3/4 inch funnel adapter |
TAB | Sheet of thirty five 1/2 inch square reflective tabs |
TAPE | 1” x 7.75” strip of reflective tape |
Silahkan isi formulir di bawah ini untuk mendapatkan harga terbaik dari tim kami.