Untuk mendapatkan informasi lebih lengkap tentang:
Ojiyas Outer Diameter Air Jet LV Type
Segera Hubungi Kami :
(62) 778 408 6403
(62) 815 3611 0114
sales@lfc.co.id
The Ojiyas air jet acts like a measurement probe and is to be used together with a display. Ojiyas air jet LV type is a contact type of air jet shaped like the Ojiyas air jet VC type. The Ojiyas air jet LV type is used for measuring outside diameter of workpieces with a surface roughness of more than 6.3 μm Rz or having measured surface width of less than 5 mm. The carbide ball is set on the measuring point of the contact leaf (blade spring).
The Ojiyas Air Jet LV type can measure the following:
- outside diameters
- flatness
- perpendicularity
- cylindricity
- circularity or roundness
Here are some other applications that air gauges can be used for:
Here are some displays that you can use with air gauges:
If you wish to learn more about air gauges, you can read about "Introduction to Dimensional Air Gauging" on our blog.
You can find out more about the complete Ojiyas range of products by viewing the Ojiyas Catalog on our support page.
LFC is the authorized distributor for Ojiyas in Singapore and Indonesia. Contact us if you wish to discuss about your gauging applications further.
SPESIFIKASI Ojiyas Outer Diameter Air Jet LV Type
Ojiyas Air Jet LV Type
The LV type air jet is similar in form to the VC type air jet. It is used for measuring outside diamater of workpieces with surface roughness more than 6S or when the width of the measured surface is less than 5 mm. The carbide ball is set on the measuring point of the contact leaf (blade spring).
Harga Ojiyas Outer Diameter Air Jet LV Type
Silahkan isi formulir di bawah ini untuk mendapatkan harga terbaik dari tim kami.
