Untuk mendapatkan informasi lebih lengkap tentang:

Diatest Gear Gauges DIA-COME C2 Series

Segera Hubungi Kami :

(62) 778 408 6403

(62) 815 3611 0114

sales@lfc.co.id

Diatest Gear Gauges DIA-COME Series are devised as a flexible gaging center to measures the external and  internal diameter of precision gears, spline gears, rings, tapered holes, couplings and various type of fastener. Engineered for a superb accuracy of ±0.002 mm, the bench top gaging DIA-COME will cover a total measuring range of Mi from 11.5-300 mm and Ma from 0-275 mm. Due to its sturdy construction, the measuring tables DIA-COME are suited perfectly for use in workshops.

The instrument has one fxed and one mobile measuring contact. Measuring range of the moving contact is 20 mm, whereas the fxed measuring contact can be adjusted to adapt to measurements Mi or Ma. Conversion for measurement of diferent sizes (Mi) and to change from internal to external diameters is very fast and easy. Travel is transferred directly 1:1 to indicator unit to provide quick and unbiassed response. Virtually all types of indicators with clamping of 8h7 can also be used, also inductive and incremental probes, PC, DIATRON or printers. Measured values can be transferred wireless to PC by using an appropriate indicator. However, you will need an indicator for external measurements to display the values correctly.

Your investment on Diatest Gear Gauges DIA-COME Series, will allows your operator to work faster as it does not require a master to set the gauge on every job. The balls anvils are made of carbide for both durability and consistency. Many ball diameters are available on stock as well as roller anvils. For daily zero setting, you can simply use measured sample components or setting masters. Depends on your preference, mechanical and digital indicators storing the MIN-value can also be used and delivered on request.

Diatest Gear Gauges DIA-COME measuring tables are available in 3 sizes for specific range of measurement. The C2 tables cover different measuring ranges. Additional application kits (Kits) provide solutions for the most common measuring tasks, e. g. for small diameters. Special measuring inserts on request. Diatest Gear Gauges DIA-COME is zero-set at the factory and ready for use on factory floor ranges from the aviation and aerospace industry, mould casting and jig making, the automobile and hydraulics industry, medical industry as well as general engineering.

Diatest Gear Gauges DIA-COME Series Features:

  • Made of hardened steel for durability and repetitive accuracy.
  • Ease of use due to its direct approach of touch and go.
  • Fexibility & economical for both internal and external gaging.
  • Two applicable ranges:
    • Internal Gear Gauges Mi = 70 – 275 mm
    • External Gear Gauges ma = 0 – 245 mm
  • Ball anvils are interchangeable and also available with pointy anvils
  • The same basic gauge combined with other measuring pins is also suitable for measurement of internal and external diameters of recesses and conical parts.
  • Optional: Dial indicator

SPESIFIKASI Diatest Gear Gauges DIA-COME C2 Series

Diatest Gear Gauges DIA-COME Series Ordering Guide:

 

Code No.

DIA-COME C2-ZM

(For smaller diameter)

DIA-COME C2-ZM AL

(For mid-range diameter)

DIA-COME C2-ZM JS

(For larger diameter)

Range

Mi=70 – 120 mm

Ma=0 – 80 mm

Mi=70 – 195 mm

Ma=0 – 155 mm

Mi=70 – 275 mm

Ma=0 – 245 mm

DIA-COME C2-ZM Standard

Measuring table with 2 supports for ball pins, 1 stop bar

Additionally required: 2 ball pins

(indicate Ø of balls)

Measuring table with 2 supports for ball pins, 1 stop bar

Additionally required:2 ball pins

(indicate Ø of balls)

Measuring table with 2 supports for ball pins, 1 stop bar

Additionally required:2 ball pins (indicate Ø of balls)

DIA-COME C2-ZM Kit 1 (Small Workpiece)

1 support for adaptor; 2 adaptors for ball anvil holder; 2 support tables for small work pieces

Additionally required: 2 KS-ZM3-Ø

(indicate Ø of balls)

1 support for adaptor; 2 adaptors for ball anvil holder; 2 support tables for small work pieces

Additionally required: 2 KS-ZM3-Ø

(indicate Ø of balls)

1 support for adaptor; 2 adaptors for ball anvil holder; 2 support tables for small work pieces

Additionally required: 2 KS-ZM3-Ø

(indicate Ø of balls)

Support of measuring contacts

L= 110 mm

DIA-COME C2-ZM Kit 2 (High Workpiece)

2 x long supports for ball pins

 

 

DIA-COME C2-ZM Kit 3 (Stop adjustable in height)

1 x basic part; 1 x stop with thread

M2,5 (to screw in any type of inserts; inserts are not included!)

 

 

DIA-COME C2-ZM Kit 4

Ball anvil support

2 x supports for ball anvil for e.g. KS- MU-Ø or any other insert with thread M2,5 (KS-MU is not included)

 

 

Harga Diatest Gear Gauges DIA-COME C2 Series

Silahkan isi formulir di bawah ini untuk mendapatkan harga terbaik dari tim kami.

Diatest Gear Gauges DIA-COME Series are devised as a flexible gaging center to measures the external and  internal diameter of precision gears, spline gears, rings, tapered holes, couplings and various type of fastener. Engineered for a superb accuracy of ±0.002 mm, the bench top gaging DIA-COME will cover a total measuring range of Mi from 11.5-300 mm and Ma from 0-275 mm. Due to its sturdy construction, the measuring tables DIA-COME are suited perfectly for use in workshops.

The instrument has one fxed and one mobile measuring contact. Measuring range of the moving contact is 20 mm, whereas the fxed measuring contact can be adjusted to adapt to measurements Mi or Ma. Conversion for measurement of diferent sizes (Mi) and to change from internal to external diameters is very fast and easy. Travel is transferred directly 1:1 to indicator unit to provide quick and unbiassed response. Virtually all types of indicators with clamping of 8h7 can also be used, also inductive and incremental probes, PC, DIATRON or printers. Measured values can be transferred wireless to PC by using an appropriate indicator. However, you will need an indicator for external measurements to display the values correctly.

Your investment on Diatest Gear Gauges DIA-COME Series, will allows your operator to work faster as it does not require a master to set the gauge on every job. The balls anvils are made of carbide for both durability and consistency. Many ball diameters are available on stock as well as roller anvils. For daily zero setting, you can simply use measured sample components or setting masters. Depends on your preference, mechanical and digital indicators storing the MIN-value can also be used and delivered on request.

Diatest Gear Gauges DIA-COME measuring tables are available in 3 sizes for specific range of measurement. The C2 tables cover different measuring ranges. Additional application kits (Kits) provide solutions for the most common measuring tasks, e. g. for small diameters. Special measuring inserts on request. Diatest Gear Gauges DIA-COME is zero-set at the factory and ready for use on factory floor ranges from the aviation and aerospace industry, mould casting and jig making, the automobile and hydraulics industry, medical industry as well as general engineering.

Diatest Gear Gauges DIA-COME Series Features:

">