NDT
  1. Home
  2. Products
  3. Non-destructive Tester
  4. Coating Thickness Gauge
  5. DeFelsko Certified Polystyrene Blocks

Untuk mendapatkan informasi lebih lengkap tentang:

DeFelsko Certified Polystyrene Blocks

Segera Hubungi Kami :

(62) 778 408 6403

(62) 815 3611 0114

sales@lfc.co.id

Polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.

Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.

  • Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage
  • Ideal for use in the calibration lab, in the field or on the factory floor
  • Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder
  • Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box
  • Individually serialized for traceability to NIST or PTB - includes a Certificate of Calibration
  • Certified and labeled in both Metric and Imperial units
Zero Plates available for Certified Polystyrene Blocks.

SPESIFIKASI DeFelsko Certified Polystyrene Blocks

DeFelsko Certified Polystyrene Blocks

  • Select the Standard that most closely matches the measuring range of your gage.

Order Code

 Ideal for Approximate Thickness

Accuracy
Block 1

Block 2

Block 3

Block 4

P1

PosiTector 6000 FT, FTS, NTS, FNTS
PosiTector 200 D

375 um
15mils

2 mm
80 mils

4.5 mm
185 mils

6.5 mm
250 mils

±(2.5 um + 0.05%
of thickness)

± {0.1 mil + 0.05% 
of thickness) 

P2
PosiTector 6000 FHS, NHS, EOC

2.5 mm
100mils

6.5 mm
250 mils

13 mm
500 mils

19 mm
750 mils

P3
PosiTector 100 C

375 um
15mils

1.5 mm
60 mils

2.5 mm
100 mils

4.5 mm
185 mils

P4
PosiTector 100 D

1.5 mm
60mils

2.5 mm
100 mils

4.5 mm
185 mils

6.5 mm
250 mils

P5
PosiTector 6000 FKS, NKS

1.5 mm
60 mils

2.5 mm
100 mils

6.5 mm
250 mils

12 mm
480 mils

P6
PosiTector 200 C

375 um
15 mils

1.5 mm
60 mils

2.5 mm
100 mils

3 mm
125 mils
P7 PosiTector 6000 FHXS 1.5 mm
60 mils		 4.5 mm
185 mils		 6.5 mm
250 mils		 9.5 mm
375 mils

P8
PosiTector 6000 FNGS, FLS

13 mm
500 mils

13 mm
500 mils

13 mm
500 mils

19.5 mm
750 mils

All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB.
P1-P7 Blocks: 38 x 70 mm (1.5" x 2.75")   P8 Blocks: 76 x 76 mm (3.0" x 3.0")

Harga DeFelsko Certified Polystyrene Blocks

Silahkan isi formulir di bawah ini untuk mendapatkan harga terbaik dari tim kami.

Polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.

Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.

Zero Plates available for Certified Polystyrene Blocks.
">