- Home
- Products
- Non-destructive Tester
- Adhesion Tester
- DeFelsko Adhesion Tester PosiTest AT Verifier
Untuk mendapatkan informasi lebih lengkap tentang:
Segera Hubungi Kami :
DeFelsko devised PosiTest AT Verifier for checking the accuracy and operation of PosiTest Adhesion Testers as it is an important component in fulfilling both ISO and in-house quality control requirements. Equipped with handheld smart sensor indicator and high precision load cell, the whole set is applicable for on-site verification as well as to be used in the laboratory to compare the measurement output of any DeFelsko's series of PosiTest Pull-Off Adhesion Testers. Furthermore, it also fitted with a permanent steel 20 mm loading fixture (dolly) to ease the applicable stage of testing.
Your investment on PosiTest AT Verifier and included documents will allow you to quickly verify the accuracy of PosiTest Adhesion Testers and check whether the probe is actually good enough for any given routine. DeFelsko PosiTest AT Verifier also enables you to certify your paint or coating job fits with the most demanding requirement. DeFelsko PosiTest AT Verifier is the most renowned industrial adhesion test verifier for painting contractors, coating specialist, certification company and supporting apparatus for valuing the remaining life assessment analysis of a used product.
DeFelsko PosiTest AT Verifier kit is consist of handheld smart sensor indicator and high precision load cell. DeFelsko PosiTest AT Verifier is operated by connecting the adhesion tester’s pull-off actuator to the PosiTest AT Verifier’s loading fixture. Then, applying pressure using the adhesion tester’s normal operating procedure. When the readings are known, the user can just simply comparing the values from any adhesion tester with DeFelsko PosiTest AT Verifier.
DeFelsko PosiTest AT Verifier features:
DeFelsko PosiTest AT Verifier
Range | 0 - 5,000 psi |
Resolution | 1 psi |
Accuracy |
+ 6.33 psi (+ 0.044 MPa) In worst case measurement system uncertainty, see included "Measurement Uncertainty" worksheet for actual uncertainty. Note: Device displays Imperial units only. |
CASE SIZE: 31 x 23 x 10 cm (12.3" x 8.8" x 3.9")
CASE WEIGHT: 3.44 kg (7.6 lbs.)
Silahkan isi formulir di bawah ini untuk mendapatkan harga terbaik dari tim kami.