Untuk mendapatkan informasi lebih lengkap tentang:

Chennai Metco Auto Cold Cutting Baincut XXL

Segera Hubungi Kami :

(62) 778 408 6403

(62) 815 3611 0114

sales@lfc.co.id

Chennai Metco provides a complete solution for metallography and metallurgy inspection by various methods of grindingpolishing, and etching.

Whatever the specimen may be ranging from metals, ceramic, fibres to mineral of tougher grains, Chennai Metco BAINCUT XXL Auto is capable of heavy duty sizing of specimen for metallographic purposes. It is equipped with light alloy casting base with FRP hood for corrosion protection, viewing window, cleaning hose, safety lock and fume digestion system for safer operation. The voluminous internal space is also available to lock big specimens securely with minimal vibration and without much alteration on micro structure of the specimen. 

When the specimen is ready, the next step will be grinding and polishing it on Chennai Metco BAINPOL so that the metallographic structure of specimen can be observed and measured in detail with Vision engineering TIM5 or digitaloptical, or electron microscopy.

SPESIFIKASI Chennai Metco Auto Cold Cutting Baincut XXL

Chennai Metco BAINCUT XXL Auto specification are as follows:

Cutting Capacity up to 180 mm dia

25 HP motor,3 Phase Motor

Hydraulic Automation

Cutting action automatic-‘Z’ Movement

Spindle Speed 1000 - 3000 rpm

Cut-off wheel dia 20” (500 mm)

Coolant Tank with 130 ltrs capacity

Cut off wheel cooling system

One large drains for draining the coolant with Magnate Separator

Table: 500 X 500 mm with 12mm T-slot.

Dimension: 2225 X 1860 X 2025 mm

T-slot table.

Dapatkan Penawaran Harga

Silahkan isi formulir di bawah ini untuk mendapatkan penawaran harga terbaik dari tim kami,

Chennai Metco provides a complete solution for metallography and metallurgy inspection by various methods of grindingpolishing, and etching.

Whatever the specimen may be ranging from metals, ceramic, fibres to mineral of tougher grains, Chennai Metco BAINCUT XXL Auto is capable of heavy duty sizing of specimen for metallographic purposes. It is equipped with light alloy casting base with FRP hood for corrosion protection, viewing window, cleaning hose, safety lock and fume digestion system for safer operation. The voluminous internal space is also available to lock big specimens securely with minimal vibration and without much alteration on micro structure of the specimen. 

When the specimen is ready, the next step will be grinding and polishing it on Chennai Metco BAINPOL so that the metallographic structure of specimen can be observed and measured in detail with Vision engineering TIM5 or digitaloptical, or electron microscopy.

">