Untuk mendapatkan informasi lebih lengkap tentang:

Vertex Finishing Bench Machine VCF 500

Segera Hubungi Kami :

(62) 778 408 6403

(62) 815 3611 0114

sales@lfc.co.id

Vertex Finishing Bench Machine VCF 500 are optimized to smoothen and creates a transitional edge between two vertices of an object (It can also be known as a bevel). Chamfering and deburring with Vertex Finishing Bench Machine VCF 500  connotes more often for micro cutting of 15° to 45°. If the un-chamfered intersection of the adjoining faces would otherwise form a right angle, 90° as is most common, the chamfer will typically be uniform and pitched at 45°. Vertex Finishing Bench Machine VCF 500 can also set with fully chamfered square interior of octagonal shape. (By contrast, a fillet is the rounding off of an interior corner, and a rounding of an exterior corner is called a "round"or a "radius"). 

With its multi-purpose features and compact form factor, the Vertex Finishing Bench Machine VCF 500 is the finest investment for any size of workshop. The bevelling knife is also interchangeable cemented carbide inserts SPUN422 to easily decrease cost and increase your working ability. For your comparison, ther are 3 other model to choose from. The Vertex 500W with taper wheel, the vertex 500F with face milling feature and Vertex 500S with optimized abrasive disk.

 

Vertex Finishing Bench Machine VCF 500 Features:

  • Simplified operation, suitable for unskilled personnel.
  • Versatile application for bevelling and deburring 45 ° on various materials made of steel, cast iron, nonferrous metals, plastics, acrylic and aluminum.
  • Ideal for weld-joint seamless preparation.
  • With interchangeable cemented carbide inserts SPUN422 to easily decrease cost and increase working ability. 
  • Including waltz mill.
  • Milling width from 0 to 3 mm.
  • Powered by 750 Watt servo motor of 1 Pk with speed range of 3500 O/min.
  • Wide dimension of working table of 500 x 320 mm.
  • With dimensions of the grinding stone: 125 x 50 x 32 mm.

 

SPESIFIKASI Vertex Finishing Bench Machine VCF 500

Vertex Finishing Bench Machine VCF 500

 
ORDER NO. WEIGHT VOLTAGE SPEED LENGTH HEIGHT ANGLE CODE NO.
VCF-500
29 kgs
3Ø220V
or
1Ø110V/220V 50HZ/60HZ
3500 r.p.m.
500m/m(Changable)
0-3m/m
15° ~ 45° (Changable)
1023-001

 

 

Dapatkan Penawaran Harga

Silahkan isi formulir di bawah ini untuk mendapatkan penawaran harga terbaik dari tim kami,

Vertex Finishing Bench Machine VCF 500 are optimized to smoothen and creates a transitional edge between two vertices of an object (It can also be known as a bevel). Chamfering and deburring with Vertex Finishing Bench Machine VCF 500  connotes more often for micro cutting of 15° to 45°. If the un-chamfered intersection of the adjoining faces would otherwise form a right angle, 90° as is most common, the chamfer will typically be uniform and pitched at 45°. Vertex Finishing Bench Machine VCF 500 can also set with fully chamfered square interior of octagonal shape. (By contrast, a fillet is the rounding off of an interior corner, and a rounding of an exterior corner is called a "round"or a "radius"). 

With its multi-purpose features and compact form factor, the Vertex Finishing Bench Machine VCF 500 is the finest investment for any size of workshop. The bevelling knife is also interchangeable cemented carbide inserts SPUN422 to easily decrease cost and increase your working ability. For your comparison, ther are 3 other model to choose from. The Vertex 500W with taper wheel, the vertex 500F with face milling feature and Vertex 500S with optimized abrasive disk.

 

Vertex Finishing Bench Machine VCF 500 Features:

 

">