Untuk mendapatkan informasi lebih lengkap tentang:

Tosok Electric Gauge CEG-2000

Segera Hubungi Kami :

(62) 778 408 6403

(62) 815 3611 0114

sales@lfc.co.id

Tosok CEG-2000 Electric Gauge display offer the ultimate non-destructive precision in measuring dimensional workpiece when combined with an electronic probe sensor. Tosok CEG-2000 Electric Gauge display precision readings of 2 or 4 channel that utilizes a sensor probe input of contact electronic called a linear variable differential transformer (LVDT). Tosok CEG-2000 with LVDT probes are versatile, absolute linear position/displacement transducers; inherently frictionless, as they have a virtually infinite life cycle when properly used. As AC operated LVDT probes do not contain any electronics, they can be designed to operate at cryogenic temperatures or up to 1200 °F (650 °C), in harsh environments, under high vibration and shock levels. LVDTs have been widely used in applications such as power turbines, hydraulics, automation, aircraft, satellites, nuclear reactors, and many others. These probe have low hysteresis and excellent repeatability. Because the sliding core does not touch the inside of the tube or rotating contacts allows the LVDT to be completely sealed against the environment. This frictionless method made the Tosok Electric Gauge Micrometer CEG-2000 with LVDT probes is a highly reliable device for repetitive test at higher pace as in automation production line. 

Tosok Electric Gauge Micrometer CEG-2000 with its LVDT probes converts a position or linear displacement from a mechanical reference (zero, or null position) into a proportional electrical signal containing phase (for direction) and amplitude (for distance) information.  Utilizing LVDT sensing technology, the sensor proportionally scales an output that is interpreted by the Tosok CEG-2000 display as a dimensional value. The LVDT operation does not require an electrical contact between the moving part (probe or core assembly) and the coil assembly, but instead relies on electromagnetic coupling. The LVDT can be used as an absolute measurement in automation check up of massive production line. Even if the power is switched off, on restarting it, the LVDT shows the same measurement, and no positional information is lost. Any rotation of the core around the axis will not affect its measurement precision.

The Tosok CEG-2000 Electric Gauge display with Pass/Fail feedback is instant with the integral easy view three-color LED bar-graph display. Two or four input channel models are available allowing multiple dimensions with various sensors to be connected to the same display. All CEG-2000’s come standard with RS-232 serial communications for data analysis on PC’s. An Excel spreadsheet program is available for download for free from the SHIMPO website that allows communication with up to 5 units simultaneously. The Tosok electric gauge with LVDT technology offers reliability to measure small tolerances down to 0.05 micron. Due to its fast response, outstanding tolerance and accurate repeatability, Tosok electric gauge micrometers are the ideal investment for quality measurements on the production floor without the additional cost on new personnel.

 

Nidec Tosok CEG-2000 Electric Gauge Features:

  • Column type display with slim 2” (50 mm) wide frame and sturdy enclosure allowing for placement on any bench also compact arrangement when daisy-chaining units with multiple arrangement of probes and testing sequences.
  • Red/Orange/Green 3- color, 101 segment bar graph display with programmable set points makes it easy to quickly view measurements and make go/no-go judgments
  • Actual values presented on the 8-digit alphanumeric display
  • The display can be programmed to show technical drawing tolerances
  • In coordination with the max./min. masters, control keys are used to automatically calibrate the zero and full scale of the display
  • 10 settings can be programmed to save master values allowing quick retrieval for future tests
  • 2 or 4 electrical sensor input models available to aid in using the same display with multiple sensors as well as choose various mathematical calculations between sensors
  • Utilizing the standard serial output communications, data can be downloaded to a PC for processing and further evaluation
  • Digimatic or judgment output options available

SPESIFIKASI Tosok Electric Gauge CEG-2000

Nidec Tosok CEG-2000 Electric Gauge Technical Guide:

 
Nidec Tosok CEG-2000 Electric Gauge Model 2 channels. Optional 4 channels
Comparison Calculations 1–2, 1+2, 2–1, AVE (1–2), AVE (1+2), AVE (2–1)
Measuring Range μm (mm)

5 (0.00500), 10 (0.0100), 20 (0.0200),

50 (0.0500), 100 (0.100), 200 (0.200),

500 (0.500), 1000 (1.00)

Resolution in μm (mm)

0.05 (0.00005), 0.1 (0.0001), 0.2 (0.0002),

0.5 (0.0005), 1 (0.001), 2 (0.002), 5 (0.005), 10 (0.01)

Shift Range ±300% (full scale)
Display Bar graph: 101 segment 3 color with Green (OK), Red (No Go)
Measurement Values: 8 digits
Auto Mastering Range Small Limit: ±50% (full scale)
Large Limit: ±20% (full scale)
Power Requirement 85 to 264 VAC, 50/60 Hz 100-VAC
Power Supply Capacity 30 VA
Operating Temperature 32 to 113°F (0 to 45°C)
External Inputs Measurement, reset, large limit, small limit
Serial Output RS-232
Decision Output (optional) 8 (DC12/24V)
BCD Output (optional) 1 set (DC12/24V)
Analog Input 4 (connection to column)
Dimensions 2″ wide x 19″ high x 8″ deep (50 × 480 × 200 mm)
Weight 8.8 lb (4 kg)
Warranty 1-Year

 

Nidec Tosok CEG-2000 Electric Gauge Ordering Guide:

 
CEG-2000-2 2 channel electrical input CEG micrometer vertical display
CEG-2000-4 4 channel electrical input CEG micrometer vertical display

Nidec Tosok CEG-2000 Electric Gauge Optional Accessories

 
CAG2000-OP-CB-1 RS-232 Communication Cable 9 pin for PC

 

Dapatkan Penawaran Harga

Silahkan isi formulir di bawah ini untuk mendapatkan penawaran harga terbaik dari tim kami,

Tosok CEG-2000 Electric Gauge display offer the ultimate non-destructive precision in measuring dimensional workpiece when combined with an electronic probe sensor. Tosok CEG-2000 Electric Gauge display precision readings of 2 or 4 channel that utilizes a sensor probe input of contact electronic called a linear variable differential transformer (LVDT). Tosok CEG-2000 with LVDT probes are versatile, absolute linear position/displacement transducers; inherently frictionless, as they have a virtually infinite life cycle when properly used. As AC operated LVDT probes do not contain any electronics, they can be designed to operate at cryogenic temperatures or up to 1200 °F (650 °C), in harsh environments, under high vibration and shock levels. LVDTs have been widely used in applications such as power turbines, hydraulics, automation, aircraft, satellites, nuclear reactors, and many others. These probe have low hysteresis and excellent repeatability. Because the sliding core does not touch the inside of the tube or rotating contacts allows the LVDT to be completely sealed against the environment. This frictionless method made the Tosok Electric Gauge Micrometer CEG-2000 with LVDT probes is a highly reliable device for repetitive test at higher pace as in automation production line. 

Tosok Electric Gauge Micrometer CEG-2000 with its LVDT probes converts a position or linear displacement from a mechanical reference (zero, or null position) into a proportional electrical signal containing phase (for direction) and amplitude (for distance) information.  Utilizing LVDT sensing technology, the sensor proportionally scales an output that is interpreted by the Tosok CEG-2000 display as a dimensional value. The LVDT operation does not require an electrical contact between the moving part (probe or core assembly) and the coil assembly, but instead relies on electromagnetic coupling. The LVDT can be used as an absolute measurement in automation check up of massive production line. Even if the power is switched off, on restarting it, the LVDT shows the same measurement, and no positional information is lost. Any rotation of the core around the axis will not affect its measurement precision.

The Tosok CEG-2000 Electric Gauge display with Pass/Fail feedback is instant with the integral easy view three-color LED bar-graph display. Two or four input channel models are available allowing multiple dimensions with various sensors to be connected to the same display. All CEG-2000’s come standard with RS-232 serial communications for data analysis on PC’s. An Excel spreadsheet program is available for download for free from the SHIMPO website that allows communication with up to 5 units simultaneously. The Tosok electric gauge with LVDT technology offers reliability to measure small tolerances down to 0.05 micron. Due to its fast response, outstanding tolerance and accurate repeatability, Tosok electric gauge micrometers are the ideal investment for quality measurements on the production floor without the additional cost on new personnel.

 

Nidec Tosok CEG-2000 Electric Gauge Features:

">