Untuk mendapatkan informasi lebih lengkap tentang:

Moore & Wright Steel Gauge Blocks 700 Series

Segera Hubungi Kami :

(62) 778 408 6403

(62) 815 3611 0114

sales@lfc.co.id

Moore & Wright Gauge Blocks 700 Series are reliable gauge blocks devised by Bower Group. Moore & Wright Gauge Blocks 700 are made of calibrated Steel block for a basic inspection on production line. Moore & Wright Gauge Blocks 700 is conform with standard: DIN 861. Moore & Wright gauge blocks come in sets of blocks of various lengths, along with two wear blocks, to allow a wide variety of standard lengths to be made up by stacking them. The length of each block is actually slightly shorter than the nominal length stamped on it, because the stamped length includes the length of one wring film, a film of lubricant which separates adjacent block faces in normal use. The thickness of the ring film is about 25 nanometers (0.98 µin).

Moore & Wright Gauge Blocks 700 are calibrated to be accurate at 68 °F (20 °C) and should be kept at this temperature when taking measurements. This mitigates the effects of thermal expansion. The wear blocks, made of a harder substance like tungsten carbide, are included at each end of the stack, whenever possible, to protect the gauge blocks from being damaged in use. However, if you are looking for gauge block with better accuracy and lifetime of upto 5x, you might also wants to consider Moore & Wright Carbide Gauge Blocks 710 Series.

 

Moore & Wright Carbide Gauge Blocks 700 Series Features:

  • Made from high quality stress relieved alloy steel
  • Hardened to HV820 (HRC65)
  • Every gauge block has its own serial number
  • Excellent wringability due to micro polished surfaces
  • Available in 2 grades specfication: Grade 1 for inspection, Grade 2 for workshop
  • All Moore & Wright Carbide Gauge Blocks 700 Series sets have MOORE & WRIGHT certificate
  • All Moore & Wright Carbide Gauge Blocks 700 Series sets can be issued with UKAS certificate at extra cost

 

SPESIFIKASI Moore & Wright Steel Gauge Blocks 700 Series

A Set of Moore & Wright Steel Gauge Blocks 700 Series are Consist of:

 
No. blocksNominal sizeQtyStep (mm)No. blocksNominal sizeQtyStep (mm)No. blocksNominal sizeQtyStep (mm)No. blocksNominal sizeQtyStep (mm)
103 1.005 1   47 1.005 1   87 1.001-1.009 9 0.001 32 1.005 1  
  1.01-1.49 49 0.01   1.01-1.09 9 0.01   1.01-1.49 49 0.01   1.01-1.09 9 0.01
  0.50-24.50 49 0.5   1.10-1.90 9 0.1   0.50-9.50 19 0.5   1.10-1.90 9 0.1
  25.0-100.0 4 25   1.0-24.0 24 1   10.0-100.0 10 10   1.0-9.0 9 1
          25.0-100.0 4 25           10.0-30.0 3 10
                          60.0 1

 

 Moore & Wright Carbide Gauge Blocks 700 Series Ordering Guide:

 
Code No.DescriptionNo. of Blocks
MW700-02 Grade 1 103
MW700-03 Grade 2 103
MW700-05 Grade 1 87
MW700-06 Grade 2 87
MW700-08 Grade 1 47
MW700-09 Grade 2 47
MW700-11 Grade 1 32
MW700-12 Grade 2 32

 

Harga Moore & Wright Steel Gauge Blocks 700 Series

Silahkan isi formulir di bawah ini untuk mendapatkan harga terbaik dari tim kami.

Moore & Wright Gauge Blocks 700 Series are reliable gauge blocks devised by Bower Group. Moore & Wright Gauge Blocks 700 are made of calibrated Steel block for a basic inspection on production line. Moore & Wright Gauge Blocks 700 is conform with standard: DIN 861. Moore & Wright gauge blocks come in sets of blocks of various lengths, along with two wear blocks, to allow a wide variety of standard lengths to be made up by stacking them. The length of each block is actually slightly shorter than the nominal length stamped on it, because the stamped length includes the length of one wring film, a film of lubricant which separates adjacent block faces in normal use. The thickness of the ring film is about 25 nanometers (0.98 µin).

Moore & Wright Gauge Blocks 700 are calibrated to be accurate at 68 °F (20 °C) and should be kept at this temperature when taking measurements. This mitigates the effects of thermal expansion. The wear blocks, made of a harder substance like tungsten carbide, are included at each end of the stack, whenever possible, to protect the gauge blocks from being damaged in use. However, if you are looking for gauge block with better accuracy and lifetime of upto 5x, you might also wants to consider Moore & Wright Carbide Gauge Blocks 710 Series.

 

Moore & Wright Carbide Gauge Blocks 700 Series Features:

 

">