Untuk mendapatkan informasi lebih lengkap tentang:

Maykestag Stub Drills DIN 6537K

Segera Hubungi Kami :

(62) 778 408 6403

(62) 815 3611 0114

sales@lfc.co.id

Maykestag Stub Drills are made to conform with 6537K


Maykestag Stub Drills DIN 6537K is made of Austrian patented micro-grain-carbide which produces higher toughness, hardness and bending strength. Maykestag Stub Drills DIN 6537K is manufactured with the most up-to-date metallurgic infuser technology of 5% cobalt-alloyed high speed steel for your stability and wear resistance. The Maykestag's optimised tool geometry on its Screw Machine Drills provide a higher tool stability (even in unstable working conditions) and a higher surface quality of the material to be machined. 

Depends on your machining set up,  Maykestag Stub Drills are recommended  for drilling heat resistant steels, Cr-Ni steels, high carbon steel castings, grey cast iron, cast steels, manganese steels, bronze, aluminium with high percentage silicium and other difficult-to-machine materials.  Optimized for both high stability and universal usability, it also offers optimum chip breakage, high centering accuracy and less cutting forces. Maykestag Screw Machine Drills are suitable for materials with tensile strength up to 1300 N/mm2. This sturdy drill is suitable on toolmaking, jigs, precision hinges, general engineering and many more. However If you are looking for woodruff keyseat cutter, you can also opt for Maykestag DIN 850.

 

Maykestag T-Slot Milling Cutters DIN 851 AB Features:

  • Recommended for drilling heat resistant steels, Cr-Ni steels, high carbon steel castings, grey cast iron, cast steels, manganese steels, bronze, aluminium with high percentage silicium and other difficult-to-machine materials.
  • Suitable for material with tensile strength up to 1300 N/mm2.
  • Versatile and highly recommended for both manual and automatic machining

 

-DIN 6535-HA (Shank) *Also available with Weldon-shank (DIN 6535-HB) without extra charge.

-ALUNIT-S® (Special coating for highest cutting performance)

-ISO Certification: ALPEN-MAYKESTAG has been certified to EN ISO 9001 on all sites since 2000.

SPESIFIKASI Maykestag Stub Drills DIN 6537K

Maykestag Stub Drills DIN 6537K Ordering Guide:

 
d1h7mm d2h5mm l1mm l2mm Z
3 6 62 20 2
3.5 6 62 20 2
4 6 66 24 2
4.5 6 66 24 2
5 6 66 28 2
5.5 6 66 28 2
6 6 66 28 2
6.5 8 79 34 2
7 8 79 34 2
7.5 8 79 41 2
8 8 79 41 2
8,5 10 89 47 2
9 10 89 47 2
9.5 10 89 47 2
10 10 89 47 2
10.5 12 102 55 2
11 12 102 55 2
11.5 12 102 55 2
12 12 102 55 2
12.5 14 107 60 2
13 14 107 60 2

Dapatkan Penawaran Harga

Silahkan isi formulir di bawah ini untuk mendapatkan penawaran harga terbaik dari tim kami,

Maykestag Stub Drills are made to conform with 6537K


Maykestag Stub Drills DIN 6537K is made of Austrian patented micro-grain-carbide which produces higher toughness, hardness and bending strength. Maykestag Stub Drills DIN 6537K is manufactured with the most up-to-date metallurgic infuser technology of 5% cobalt-alloyed high speed steel for your stability and wear resistance. The Maykestag's optimised tool geometry on its Screw Machine Drills provide a higher tool stability (even in unstable working conditions) and a higher surface quality of the material to be machined. 

Depends on your machining set up,  Maykestag Stub Drills are recommended  for drilling heat resistant steels, Cr-Ni steels, high carbon steel castings, grey cast iron, cast steels, manganese steels, bronze, aluminium with high percentage silicium and other difficult-to-machine materials.  Optimized for both high stability and universal usability, it also offers optimum chip breakage, high centering accuracy and less cutting forces. Maykestag Screw Machine Drills are suitable for materials with tensile strength up to 1300 N/mm2. This sturdy drill is suitable on toolmaking, jigs, precision hinges, general engineering and many more. However If you are looking for woodruff keyseat cutter, you can also opt for Maykestag DIN 850.

 

Maykestag T-Slot Milling Cutters DIN 851 AB Features:

 

-DIN 6535-HA (Shank) *Also available with Weldon-shank (DIN 6535-HB) without extra charge.

-ALUNIT-S® (Special coating for highest cutting performance)

-ISO Certification: ALPEN-MAYKESTAG has been certified to EN ISO 9001 on all sites since 2000.

">