1. Home
  2. Products
  3. Polishing Compound
  4. Koyo-Sha Titanium Buffing & Polishing Compound

Untuk mendapatkan informasi lebih lengkap tentang:

Koyo-Sha Titanium Buffing & Polishing Compound

Segera Hubungi Kami :

(62) 778 408 6403

(62) 815 3611 0114

sales@lfc.co.id

Koyo-Sha Buffing & Polishing compound have wide varieties and selection to choose from. Titanium which was previously difficult to have a luster finish, can easily be polished to surface equivalent with #400 and #600 finish of stainless steel. With the right sisal and buffing disc, each Koyo-sha Buffing & Polishing compound will perform superbly on polishing titanium.

Prior to polishing, titanium work piece that is severely scratched may need to be sanded down. Once the scratch depth is minimal, it is advised to start with the coarsest compound that is applicable such as Koyo-Sha's TP-100. From there one should than move down to the next buffing compound such as Koyo-Sha TP-401 and so on until the desired finish is achieved.

 

Koyo-sha Buffing & Polishing Compound For Titanium Are As Follows:

 

1. TP-100

A polishing compound which is designed by attaching greater importance in high cutting power, and it shows much effect in a process of removing scratches and waves of materials. by using TP-200 compound after this stage, cloth buff finish will be easier.
2. TP-200

A polishing compound of good balance of cutting and coloring. It is considered as a standard product for sisal buff. suitable for cutting and coloring to get a smooth surface without pin holes.
3. C-800
4. TP-300

An indispensable polishing compound for a process of luster finish. it removes sisal patterns smoothly, and a luster surface equivalent to #400 finish of stainless steel can be obtained.
5. TP-401

It prevents works to have pin holes and buff scratches during a "green rouge compound finish" process, while polishing at high load. by using TP-401, a luster surface with a high reflection rate equivalent to #600 finish of stainless steel can be obtained.

 

For further details on Koyo-Sha Titanium Buffing & Polishing Compound,

kindly contact our sales department.

SPESIFIKASI Koyo-Sha Titanium Buffing & Polishing Compound

Koyo-sha Buffing & Polishing Compound On Application Are As Follows: 

 
For Sisal Buff:

It prevents works from having burn marks, that are easily brought about during a cutting process, and made it possible to have efficient polishing.

It shows the greatest effect when used with open sisal buffs.
For Cloth Buff: Titanium which was said to be difficult to have a luster finish can easily be finished up to surface equivalent to #400 and #600 finish of stainless steel.

 

Koyo-sha Buffing & Polishing Compound:

Solid Compound Characteristics / Application
  Product Name Color Pcs/
Box 

Buffing

Polishing

Compound

For

Cutting

⇑

⇑

⇑

⇓

⇓

⇓

 

Buffing

 

Polishing

 

Compound

 

For

Coloring

 TP-100 Black 25 For cutting on sisal buffs / high cutting power good for removing waves and scratches of materials  
TP-200 Gray 25 Suitable for cutting and coloring on sisal buffs good balance of cutting and coloring makes a surface without pin holes  
C-800 Black 30 On sisal buffs for cutting and coloring has good cutting power / suitable for sisal finish  
TP-300 Beige 30 On cloth buffs for cutting and coloring / removes sisal marks can obtain a surface equivalent to #400 finish of stainless steel  
TP-401 White 30 On cloth buffs for coloring / removes pin holes and buff scratches, and gives a lustrous surface equivalent to #600 finish of stainless steel  
SUPER ALOX Yellow 30 On cloth buffs for coloring / removes pin holes and buff scratches, and gives a lustrous surface equivalent to #600 finish of stainless steel (especially for titanium alloy, super alox creates more lustrous surface than TP-401)  

 

Contact us for more information on Koyo-Sha Buffing & Polishing Compound, 

Harga Koyo-Sha Titanium Buffing & Polishing Compound

Silahkan isi formulir di bawah ini untuk mendapatkan harga terbaik dari tim kami.

Koyo-Sha Buffing & Polishing compound have wide varieties and selection to choose from. Titanium which was previously difficult to have a luster finish, can easily be polished to surface equivalent with #400 and #600 finish of stainless steel. With the right sisal and buffing disc, each Koyo-sha Buffing & Polishing compound will perform superbly on polishing titanium.

Prior to polishing, titanium work piece that is severely scratched may need to be sanded down. Once the scratch depth is minimal, it is advised to start with the coarsest compound that is applicable such as Koyo-Sha's TP-100. From there one should than move down to the next buffing compound such as Koyo-Sha TP-401 and so on until the desired finish is achieved.

 

Koyo-sha Buffing & Polishing Compound For Titanium Are As Follows:

 

1. TP-100

A polishing compound which is designed by attaching greater importance in high cutting power, and it shows much effect in a process of removing scratches and waves of materials. by using TP-200 compound after this stage, cloth buff finish will be easier.
2. TP-200

A polishing compound of good balance of cutting and coloring. It is considered as a standard product for sisal buff. suitable for cutting and coloring to get a smooth surface without pin holes.
3. C-800
4. TP-300

An indispensable polishing compound for a process of luster finish. it removes sisal patterns smoothly, and a luster surface equivalent to #400 finish of stainless steel can be obtained.
5. TP-401

It prevents works to have pin holes and buff scratches during a "green rouge compound finish" process, while polishing at high load. by using TP-401, a luster surface with a high reflection rate equivalent to #600 finish of stainless steel can be obtained.

 

For further details on Koyo-Sha Titanium Buffing & Polishing Compound,

kindly contact our sales department.

">