Untuk mendapatkan informasi lebih lengkap tentang:
DeFelsko Certified Step Blocks
Segera Hubungi Kami :
(62) 778 408 6403
(62) 815 3611 0114
sales@lfc.co.id
DeFelsko certified step blocks is for use with PosiTector UTG. The step blocks are ideal for checking calibration and operation of ultrasonic thickness gauges. They are a vital component in fulfilling both ISO and in-house quality control requirements. All Step Blocks are made with 1018 steel. They are also the perfect tool for in-house calibration of various ultrasonic thickness gauges. DeFelsko Certified Step Blocks are affordable, and enables the operator to do the calibration job on-site.
DeFelsko Certified Step Blocks is a must have accessory for verifying the validity of your ultrasonic thickness gauge probe.
DeFelsko Certified Step Blocks features:
- Composition - 1018 steel
- available in metric and imperial units
- metric units: (2.5, 5, 7.5, 10 and 12.5 mm steps) & (25.0, 37.5, 50.0, 62.5, 75.0, 87.5, 100, and 112.5 mm steps)
- imperial units: (100, 200, 300, 400 and 500 mil steps) & (1.000”, 1.500”, 2.000”, 2.500”, 3.000”, 3.500”, 4.000”, and 4.500” inch steps)
- metric accuracy ±0.02 mm
- imperial accuracy ±1 mil
- All Certified Step Blocks are supplied with a certificate of calibration showing traceability to NIST/NPL.
LFC is the authorized distributor for DeFelsko in Singapore and Indonesia. Contact us to purchase the certified step block for your PosiTector UTG or any other DeFelsko products.
SPESIFIKASI DeFelsko Certified Step Blocks
DeFelsko Certified Step Calibration Block For PosiTector UTG Ordering Guide:
Certified Step Block B1 (Imperial)
- Ideal for use with PosiTector UTG C, CA, CLF, CX, and M probes
- 100, 200, 300, 400, and 500 mil steps
- Accuracy: +/- 1 mil
- Order Code: STDB1
Certified Step Block P (Imperial)
- Ideal for use with PosiTector UTG P probe
- 40, 60, 80, 100 mils (labeled in Imperial units only)
- Metric equivalent: 1, 1.5, 2, and 2.5 mm
- Accuracy: +/- 1 mil
- Order Code: STDUTGP
Certified Step Block B1M (Metric)
- Ideal for use with PosiTector UTG C, CA, CLF, CX, and M probes
- 2.5, 5, 7.5, 10, and 12.5 mm steps
- Accuracy: +/- 0.025 mm
- Order Code: STDB1M
Certified High Range Step Block B2 (Imperial)
- Ideal for use with PosiTector UTG C, CA, CLF, CX, and M probes
- 1.000”, 1.500”, 2.000”, 2.500”, 3.000”, 3.500”, 4.000”, and 4.500” inch steps
- Accuracy +/- 0.002”
- Order Code: STDB2
Certified High Range Step Block B2M (Metric)
- Ideal for PosiTector UTG C, CA, CLF, CX, and M probes
- 25.0, 37.5, 50.0, 62.5, 75.0, 87.5, 100, and 112.5 mm steps
- Accuracy +/- 0.04 mm
- Order Code: STDB2M
Harga DeFelsko Certified Step Blocks
Silahkan isi formulir di bawah ini untuk mendapatkan harga terbaik dari tim kami.
