CV instruments Portable Brinell Hardness Tester W-HB1500 is devised as the most practical instrument to measure Brinell scale on working site of any plane, conventionally for full load (1580kgf). This instruments characterizes the indentation hardness of materials through the scale of penetration of a spherical steel or carbide indenter, loaded on a material test-piece within tolerance of <0.5%. The user friendly interface allows your operator for direct approach to measure toughness of a material and the maximum amount of energy in accordance with ISO 6506.
The classic HB1500 Portable Brinell Hardness Tester is designed to test force by simply hands-on control over a shear pin. After the identation press, you can observe the diameter of the indention with the included reading microscope to obtain the brinell hardness number. The clever devices is delivered in a compact set for Remaining Life Analysis (RLA test), to test the hardness of new forgings, hot castings, steels, nonferrous metal and its alloy products, and to test the hardness of annealed, normalizing and tempered mechanical parts
The testers portability is applicable to both fixed location and portable hardness testing machines which makes it reliable and widely used in the defense industry inspection, tool-making, jig and mould, and general engineering which require testing on larger specimen. However, if you are looking for higher accuracy of unbiassed personal interpretation with motorized identation and digital sensory unit, you might also wants to consider CV instruments Brinell Hardness Tester CV-3000LDB
CV instruments Portable Hardness Tester Features:
CV instruments Portable Brinell Hardness Tester W-HB1500 Ordering Guide:
|Tolerance of test force||<0.5%|
|Accuracy||In accordance with ISO 6506|
|Indenter||Ø 7.26mm steel spherical surface indenter - (range: 100-400HB) - Ø 4.0mm carbide spherical surface indenter - (Optional) (range: 400-650HB)|
|Net weight||C clamp: 4.2kg - Hammer impact: 0.8kg - Bench: 5.1kg|
When quoting a Brinell hardness number (BHN or more commonly HB), the conditions of the test used to obtain the number must be specified. The standard format for specifying tests can be seen in the example "HBW 10/3000". "HBW" means that a tungsten carbide (from the chemical symbol for tungsten or from the Swedish/German name for tungsten, "Wolfram") ball indenter was used, as opposed to "HBS", which means a hardened steel ball. The "10" is the ball diameter in millimeters. The "3000" is the force in kilograms force. Be advised to get the suitable instruments on your application by simply send your inquiry to us
Silahkan isi formulir di bawah ini untuk mendapatkan harga terbaik dari tim kami.