Untuk mendapatkan informasi lebih lengkap tentang:

Sylvac Digital Indicator S_Dial One IP67

Segera Hubungi Kami :

(62) 778 408 6403

(62) 815 3611 0114

sales@lfc.co.id

Sylvac Digital Indicator S_Dial One is devised to accurately measure small distances and angles, and amplify them to make them more obvious readings. Sylvac Digital Indicator S_Dial One is engineered with a digital display and repeatabilty up to 2µm so that the presence, or exact quantity, of some small distance can be conveniently realized (for example, a small height difference between two flat surfaces, a slight lack of concentricity between two cylinders, or other small physical deviations). 

By having a Sylvac Digital Indicator S_Dial One, you can conduct tolerance variation checks during the inspection process of a machined part or measure the deflection of a beam or ring under laboratory conditions. Thanks to its IP67 certified application, you can use this gauge practically in any factory floor where a small measurement needs to be indicated in harsh environments prone to water-humidity, direct coolant and oil spills. 

Sylvac Digital Indicator S_Dial One can record and transmit the data to any devices, through a RS-232 or USB connectivity. This facilitates statistical process control (SPC), which allows both your measurement and fabrication inspection to be properly recorded in a tabular dataset (such as a database table or spreadsheet) and for statistical analysis to be performed on them. You can also use this device for improvised gauging rig with Sylvac's gauging multiplexer software.

Another advantage is that they can be switched between metric and inch units with the press of a button, thus obviating a separate unit conversion step of using a calculator. This obviates manual recording of long columns of numbers, which not only reduces the risk of the operator's errors (such as digit transpositions) but also improves the productivity of the process by reducing the human resources needed for time-consuming data recording, calculating and copying tasks. 

Sylvac Digital Indicator S_Dial One Features:

  • Measuring range 12.5 / 25 / 50 mm
  • Sleeping mode after 20 min. of non usage
  • Integrated lifter for 12.5 and 25 mm versions
  • Maximum error of 5 µm
  • Heavy-duty protection rating IP67 according to IEC 60529, with or without connector

SPESIFIKASI Sylvac Digital Indicator S_Dial One IP67

Sylvac Digital Indicator S_Dial One Ordering Guide:

    905.0121 905.0131 905.0141 905.0151 905.0161 905.0171
 Measuring range  mm 12.5 12.5 25 25 50 50
 Resolution  mm 0.01 0.001 0.01 0.001 0.01 0.001
 Max error fe  µm 10 1) 5 10 1) 6 20 1) 8
 Repeatability  µm 2
 A  mm 52.3 65.5 92.5
 B  mm 73.7 86.9 140.5
 S_Connect: Proximity / Power USB / RS232 / Wireless 2)
 Programmable by PC
 Zero setting
 Selection of measuring direction
 Standard functions mm/inch, preset (max 199.999), hold, resolution, key lock

 

Harga Sylvac Digital Indicator S_Dial One IP67

Silahkan isi formulir di bawah ini untuk mendapatkan harga terbaik dari tim kami.

angles, and amplify them to make them more obvious readings. Sylvac Digital Indicator S_Dial One is engineered with a digital display and repeatabilty up to 2µm so that the presence, or exact quantity, of some small distance can be conveniently realized (for example, a small height difference between two flat surfaces, a slight lack of concentricity between two cylinders, or other small physical deviations). 

By having a Sylvac Digital Indicator S_Dial One, you can conduct tolerance variation checks during the inspection process of a machined part or measure the deflection of a beam or ring under laboratory conditions. Thanks to its IP67 certified application, you can use this gauge practically in any factory floor where a small measurement needs to be indicated in harsh environments prone to water-humidity, direct coolant and oil spills. 

Sylvac Digital Indicator S_Dial One can record and transmit the data to any devices, through a RS-232 or USB connectivity. This facilitates statistical process control (SPC), which allows both your measurement and fabrication inspection to be properly recorded in a tabular dataset (such as a database table or spreadsheet) and for statistical analysis to be performed on them. You can also use this device for improvised gauging rig with Sylvac's gauging multiplexer software.

Another advantage is that they can be switched between metric and inch units with the press of a button, thus obviating a separate unit conversion step of using a calculator. This obviates manual recording of long columns of numbers, which not only reduces the risk of the operator's errors (such as digit transpositions) but also improves the productivity of the process by reducing the human resources needed for time-consuming data recording, calculating and copying tasks. 

Sylvac Digital Indicator S_Dial One Features:

">