Untuk mendapatkan informasi lebih lengkap tentang:

Rong Fu Radial Drill RF-1100

Segera Hubungi Kami :

(62) 778 408 6403


SPESIFIKASI Rong Fu Radial Drill RF-1100

Rong Fu Radial Drill RF-1100 Ordering Guide:

Dai.of column 260
Distance from column surface to spindle center , Max 1100
Distance from column surface to spindle center , Min 280
Travel of spindle head 820
Distance from base surface to spindle end , Max 1270
Distance from base surface to spindle end , Min 470
Elevating height of Arm 570
Effective area of box table 635x520x415
Dimension of base 1725x715x180
Taper hole spindle MT#4
Stroke of spindle 230
R.P.M of spindle (rpm x steps) 44-1500x12 steps
Feed of spindle (rev. x steps) 0.05, 0.09, 0.15x3 steps
Main motor (HP) 3HP
Elevating motor (HP) 1HP
Coolant equipment (HP) 1/8HP
Machine height from floor (Max.) 2530
Base + column height 2000
Net weight (approx)kgs 1800
Shipping weight (approx)kgs 1950
Shipping dimensions (LxWxH) 1880x864x2210


 Rong Fu Radial Drill RF-1100 Application Guide:


Steel 42mm (1 2/3")
Cast iron 55mm (2 3/16")
Steel 25mm (1")
Cast iron 35mm (1 1/2 ")



Dapatkan Penawaran Harga

Silahkan isi formulir di bawah ini untuk mendapatkan penawaran harga terbaik dari tim kami,

Rong Fu Radial Drill RF-1100 is a compact radial arm drill press. Rong Fu Radial Drill RF-1100 is a large geared head drill press in which the head can be moved with its 1HP motor along its cast iron arm that radiates from the machine's column. As it is possible to swing the arm relative to the machine's base, a Rong Fu Radial Drill RF-1100 is able to operate over a large area without having to reposition the workpiece. This saves considerable time because it is much faster to reposition the drill head than it is to unclamp, move, and then re-clamp the workpiece to the table.

Rong Fu Radial Drill RF-1100 is a reasonable investment for a small workshop or larger fabrication. With Rong Fu Radial Drill RF-1100, the size of work that can be handled is over 55mm on cast iron as the arm can swing out of the way of the table, allowing an overhead crane or derrick to place a bulky workpiece on the table or base. By having this CE certified drill, you can have the versatility by combining it with vise, secured directly to the table or base, or is held in a fixture. Power spindle feed is nearly universal with these machines and coolant systems can be conveniently attached. Powered with 2HP motor, Rong Fu Radial Drill RF-1100 is highly regarded by its reliability on working with tapping and drilling on cast iron and steel.


Rong Fu Radial Drill RF-1100 Features: