In metallography process, the next step after the specimen is fitted and properly sized (with any Chennai Metco BAINCUT models) will be preparing the coarse surface of the specimen. Chennai Metco Bainline Twin Belt Grinder - Wet is fine grinding machine for wet application for flat coarse grinding prior to fine grinding, you can work on with 60, 80 or 120 grit after cutting or moulding operation to remove surface imperfections.
Thanks to its dual belt grinding feature, you can set separate grit on each end without the hasle to have additional machine. The fine result is also highly repetitive and predictable to remove light metallurgical damage in the specimen surface induced during cut-off operation. Alternatively for dry grinding application, you might also want to consider Chennai Metco Bainline.
After the specimen is fine enough, the next step will be using the Chennai Metco BAINPOL VTD for variable speed Polisher / Grinder of specimen (which can be operated and polished freehand). BAINPOL VTD works to grind and polish finer abrasive particles until the desired surface quality is ready for chemical etching so that that the metallographic structure of specimen can be observed in detail with Vision engineering TIM5 or digital, optical, or electron microscopy.
Chennai Metco Twin Belt Grinder - Wet Features:
Chennai Metco Bainline Twin Belt Grinder - Wet features:
1/2HP single phase motor, 1440 RPM
100mm x 915mm Endless belt
Aluminium idler pulley machanism
Easy removable dust cover system
Easy belt change mechanism
Size : .WxHxD 630 x 250 x 520 mm
Silahkan isi formulir di bawah ini untuk mendapatkan harga terbaik dari tim kami.