Untuk mendapatkan informasi lebih lengkap tentang:

Chennai Metco Auto Spindle Polisher BAINPOL - PMV series

Segera Hubungi Kami :

(62) 778 408 6403

sales@lfc.co.id

SPESIFIKASI Chennai Metco Auto Spindle Polisher BAINPOL - PMV series

Chennai Metco BAINPOL - Auto PMV series

Other Models of Fully Automatic Type Polishers

MODEL NO MODEL TYPE MODEL NAME
PMV 028 10" BAINPOL Fully Automatic Variable Speed Single Disc – P/M - Auto
PMV 037 12" BAINPOL Fully Automatic Variable Speed Single Disc - P/M - Auto

Variable Speed 50- 600 RPM

8” / 10"/ 12" Single Aluminum Disc

Hold up to 5 Moulds ( 1 ¼”standard)

1 HP High torque AC Motor

¼ Hp Independent Polishing Head Motor

Polisher Head Variable Speed : 50 to 200 RPM

Electronic Control with LC – Display with Digital timer

Variable force : 1 to 4 bar

With Interchangeable 1¼” , 1½” 2" Mould sizes

Single Pressure Specimen loading, Pneumatically applied

Multiple Moulds Design (1 ¼" standard)

Single Pressure Specimen loading, Pneumatically applied, Pneumatically applied

Holding Band,Holding Ring

Power Supply : 230V / 50Hz ( Single Phase + Neutral + Earth)

Size:900 X 500 X 650 mm (L x W x H)

Dapatkan Penawaran Harga

Silahkan isi formulir di bawah ini untuk mendapatkan penawaran harga terbaik dari tim kami,

Chennai Metco provides a complete solution for metallography and metallurgy inspection by various methods of grindingpolishing, and etching.

In metallography process, after the specimen is fitted and properly sized (with any Chennai Metco BAINCUT models) the next step will be preparing the specimen for fine surface polishing which is done with Chennai Metco BAINPOL PMV series. 

Chennai Metco BAINPOL PMV is devised for less supervision to ensure precise and even pressure at variable speed polishing/grinding. BAINPOL PMV is intended to be used with specific consumable of finer abrasive particles for glossy surface quality. Carbon fibres as well as precious work-piece metals such as titanium, iridium, and many alloys are also applicable specimen to be grinded by Chennai Metco BAINPOL - Auto PMV series.

The next process will be chemical cleaning/etching so that the metallographic structure of specimen can be observed and measured with Vision Engineering TIM5 or digital, optical, or electron microscopy.

">