Untuk mendapatkan informasi lebih lengkap tentang:
CV Instrument Surface Roughness Tester R-135
Segera Hubungi Kami :
(62) 778 408 6403
(62) 815 3611 0114
sales@lfc.co.id
The Inspex IPX-103 series are devised to measure the quality inspection of a surface. You can work on various type of ferrous and non ferrous surface within a measuring ranges of Ra-- 0.03µm ~ 6.35µm (1µ inch~250µ inch) - Rz-- 0.2µm ~ 25.3µm (8µ inch~999µ inch). Furthermore, its sturdy metallic case allows the digital surface roughness Tester - R-135 to be versatile enough for laboratory, inspection on outdoor workshop, or wherever on-site surface roughness testing is required.
The measured values can be acquired through hands on application while the indash digital readout calculate the value and display the readings. The 9v battery-powered instrument works with the principle of surface waves on piezoelectric substrates. As the piezoelectric probes / stylus were precisely dragged along the desired surface, the probe will then sense the irregularity and generate micro electricity resulting from pressure on touching the micron cliffs - slopes graduation of surface which accumulates in any solid materials (such as steel, iron, granite, crystals, certain ceramics, and biological matter such as bone in response to applied mechanical stress.
Your investment on CV Instrument Surface Roughness Tester - R-135 will allow you to works better as it also equipped with connectivity through RS-232 to computers or printers. You can also set up an improvised tester jig for application with a digital display through its serial connection cables. Be advised that CV Instrument Surface Roughness Tester R-135 may look similar with the Inspex 103, however, the Inspex IPX-103 model is only able to print the measured data.
CV Instrument Surface Roughness Tester - R-135 Features:
- Pocket-sized and economically priced!
- External and internal finish testing with swivable tracer
- Ra and Rz parameters in one instrument and all available after each individual test
- Standard 9V battery (not included)
- Three cut-off 0.25mm, 0.8mm and 2.5mm, adjustable to 1-3-5 times
- Pie‘zo-electric pick-up stylus for external surfaces with
diamond tip of 2 micron according to the latest ISO standards - With data output via RS-232 to computer.
SPESIFIKASI CV Instrument Surface Roughness Tester R-135
CV Instrument Surface Roughness Tester R-135 Spec:
| Measuring ranges | Ra-- 0.03µm ~ 6.35µm (1µ inch~250µ inch) - Rz-- 0.2µm ~ 25.3µm (8µ inch~999µ inch) |
| Display resolution | 0.01µm / 1µ inch |
| Cut-off | 0.25mm / 0.001 inch - 2RC filter - select 1-3-5 times - 0.8mm / 0.03 inch - 2RC filter - select 1-3-5 times - 2.5mm / 0.01 inch - 2RC filter - select 2 times |
| Display | 3-digit LCD |
| Accuracy | Meets ISO and DIN standards |
| Probe Type | Piezoelectric |
| Maximum stylus force | 15.0mN / 1500mgf |
| Stylus tip radius | Diamond - 2 micron |
| Power | 9V alkaline battery (not included) |
| Battery capacity | Approx. 3000 measurements |
| Output | RS-232 to pc or printer (only IPX-104) |
CV Instrument Surface Roughness Tester - R-135 Ordering Guide:
| Code No. | Description |
|---|---|
| W-R130/3200 | Stand for R-135 |
| W-R130/4101 | Data cable to PC or Printer |
| W-R135 | Surface Roughness Tester + RS-232 output |
Harga CV Instrument Surface Roughness Tester R-135
Silahkan isi formulir di bawah ini untuk mendapatkan harga terbaik dari tim kami.
